Sign upLogin

XYOracleNetwork/sdk-xyo-client-js

View on GitHub
Star

Showing 362 of 366 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const config: XyTsupConfig = {
  compile: {
    browser: { src: { entry: ['./src/index-browser.ts'] } },
    node: { src: { entry: ['./src/index.ts'] } },
    neutral: { src: { entry: ['./src/index.ts'] } },
Severity: Major
Found in packages/modules/packages/bridge/packages/websocket/xy.config.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/bridge/packages/http/xy.config.ts on lines 2..8

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function registerCreatableModuleFactory has a Cognitive Complexity of 16 (exceeds 5 allowed). Consider refactoring.
Open

export const registerCreatableModuleFactory = <TModule extends AttachableModuleInstance>(
  registry: CreatableModuleRegistry,
  factory: CreatableModuleFactory<TModule> | LabeledCreatableModuleFactory<TModule>,
  labels?: Labels,
  /** register this as the primary factory for every schema it supports */
Severity: Minor
Found in packages/modules/packages/module/packages/model/src/CreatableModule/CreatableModuleRegistry.ts - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const flatAttachToNewNode = async (
  source: NodeInstance,
  id: ModuleIdentifier,
  destinationParams?: MemoryNodeParams,
): Promise<NodeInstance> => {
Severity: Major
Found in packages/modules/packages/node/packages/memory/src/NodeHelper/flatAttachToNewNode.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/node/packages/memory/src/NodeHelper/attachToNewNode.ts on lines 8..11

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const attachToNewNode = async (source: NodeInstance, id: ModuleIdentifier, destinationParams?: MemoryNodeParams): Promise<NodeInstance> => {
  const destination = await MemoryNode.create(destinationParams)
  return await attachToExistingNode(source, id, destination)
}
Severity: Major
Found in packages/modules/packages/node/packages/memory/src/NodeHelper/attachToNewNode.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/node/packages/memory/src/NodeHelper/flatAttachToNewNode.ts on lines 8..15

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export type WitnessModuleEventData<
  T extends ModuleInstance = ModuleInstance,
  TIn extends Payload = Payload,
  TOut extends Payload = Payload,
> = ObserveEndEventData<T, TIn, TOut> & ObserveStartEventData<T, TIn> & ModuleEventData<T>
Severity: Major
Found in packages/modules/packages/witness/packages/model/src/EventData.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/diviner/packages/model/src/EventData.ts on lines 6..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  emit<TEventName extends keyof TEventData = keyof TEventData, TEventArgs extends TEventData[TEventName] = TEventData[TEventName]>(
    eventName: TEventName,
    eventArgs: TEventArgs,
  ) {
    return this.events.emit(eventName, eventArgs)
Severity: Major
Found in packages/modules/packages/module/packages/emitter/src/BaseEmitter.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/module/packages/emitter/src/BaseEmitter.ts on lines 32..37

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export type DivinerModuleEventData<
  TInstance extends ModuleInstance = ModuleInstance,
  TIn extends Payload = Payload,
  TOut extends Payload = Payload,
> = DivineEndEventData<TInstance, TIn, TOut> & DivineStartEventData<TInstance, TIn> & ModuleEventData<TInstance>
Severity: Major
Found in packages/modules/packages/diviner/packages/model/src/EventData.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/witness/packages/model/src/EventData.ts on lines 6..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  async get(responseType?: ApiResponseType): Promise<ApiResponseTupleOrBody<T>> {
    switch (responseType) {
      case 'tuple': {
        return await this.getEndpoint(undefined, 'tuple')
      }
Severity: Major
Found in packages/sdk-utils/packages/api/src/Simple.ts and 1 other location - About 2 hrs to fix
packages/sdk-utils/packages/api/src/Simple.ts on lines 15..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  async delete(responseType?: ApiResponseType): Promise<ApiResponseTupleOrBody<T>> {
    switch (responseType) {
      case 'tuple': {
        return await this.deleteEndpoint(undefined, 'tuple')
      }
Severity: Major
Found in packages/sdk-utils/packages/api/src/Simple.ts and 1 other location - About 2 hrs to fix
packages/sdk-utils/packages/api/src/Simple.ts on lines 43..52

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  emitSerial<TEventName extends keyof TEventData = keyof TEventData, TEventArgs extends TEventData[TEventName] = TEventData[TEventName]>(
    eventName: TEventName,
    eventArgs: TEventArgs,
  ) {
    return this.events.emitSerial(eventName, eventArgs)
Severity: Major
Found in packages/modules/packages/module/packages/emitter/src/BaseEmitter.ts and 1 other location - About 2 hrs to fix
packages/modules/packages/module/packages/emitter/src/BaseEmitter.ts on lines 25..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function send has 49 lines of code (exceeds 25 allowed). Consider refactoring.
Open

  async send(address: Address, query: QueryBoundWitness, payloads?: Payload[] | undefined): Promise<ModuleQueryResult> {
    this.logger?.debug(`Begin issuing query to: ${address}`)
    const $meta = { ...query?.$meta, destination: [address] }
    const routedQuery = await PayloadBuilder.build({ ...query, $meta })
    // console.log('queryArchivist - calling')
Severity: Minor
Found in packages/modules/packages/bridge/packages/pub-sub/src/AsyncQueryBus/AsyncQueryBusClient.ts - About 1 hr to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      emitSerial(eventName: Parameters<TWrappedModule['emitSerial']>[0], eventArgs: Parameters<TWrappedModule['emitSerial']>[1]) {
    return this.mod.emitSerial(eventName, eventArgs)
  }
    Severity: Major
    Found in packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts and 1 other location - About 1 hr to fix
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 266..268

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 74.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      emit(eventName: Parameters<TWrappedModule['emit']>[0], eventArgs: Parameters<TWrappedModule['emit']>[1]) {
    return this.mod.emit(eventName, eventArgs)
  }
    Severity: Major
    Found in packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts and 1 other location - About 1 hr to fix
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 270..272

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 74.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function applyBoundWitnessDivinerQueryPayload has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
    Open

    export const applyBoundWitnessDivinerQueryPayload = (filter?: BoundWitnessDivinerQueryPayload, payloads: Payload[] = []) => {
  if (!filter) return []
  const {
    addresses, payload_hashes, payload_schemas, block, limit, offset, order = 'desc', sourceQuery, destination, timestamp,
  } = filter
    Severity: Minor
    Found in packages/modules/packages/diviner/packages/boundwitness/packages/memory/src/applyBoundWitnessDivinerQueryPayload.ts - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function isSerializable has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
    Open

    export const isSerializable = (value: unknown, maxDepth = 10): boolean => {
  if (maxDepth <= 0) {
    return false
  }
  if (value === null || typeof value === 'boolean' || typeof value === 'number' || typeof value === 'string') {
    Severity: Minor
    Found in packages/modules/packages/module/packages/model/src/lib/serializable.ts - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    export type QuerySendFinishedEventArgs<T extends Module = Module> = ModuleEventArgs<
  T,
  {
    payloads?: Payload[]
    query: QueryBoundWitness
    Severity: Major
    Found in packages/modules/packages/bridge/packages/model/src/Events/QuerySendFinished.ts and 1 other location - About 1 hr to fix
    packages/modules/packages/bridge/packages/model/src/Events/QueryFulfillFinished.ts on lines 8..16

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 73.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    export type QueryFulfillFinishedEventArgs<T extends Module = Module> = ModuleEventArgs<
  T,
  {
    payloads?: Payload[]
    query: QueryBoundWitness
    Severity: Major
    Found in packages/modules/packages/bridge/packages/model/src/Events/QueryFulfillFinished.ts and 1 other location - About 1 hr to fix
    packages/modules/packages/bridge/packages/model/src/Events/QuerySendFinished.ts on lines 8..16

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 73.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      on<TEventName extends keyof TWrappedModule['eventData']>(eventNames: TEventName, listener: EventListener<TWrappedModule['eventData'][TEventName]>) {
    return this.mod.on(eventNames, listener)
  }
    Severity: Major
    Found in packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts and 2 other locations - About 1 hr to fix
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 293..298
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 312..317

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      off<TEventName extends keyof TWrappedModule['eventData']>(
    eventNames: TEventName,
    listener: EventListener<TWrappedModule['eventData'][TEventName]>,
  ) {
    return this.mod.off(eventNames, listener)
    Severity: Major
    Found in packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts and 2 other locations - About 1 hr to fix
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 304..306
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 312..317

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      once<TEventName extends keyof TWrappedModule['eventData']>(
    eventName: TEventName,
    listener: EventListener<TWrappedModule['eventData'][TEventName]>,
  ) {
    return this.mod.once(eventName, listener)
    Severity: Major
    Found in packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts and 2 other locations - About 1 hr to fix
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 293..298
    packages/modules/packages/module/packages/wrapper/src/ModuleWrapper.ts on lines 304..306

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Severity
    Category
    Status
    Source
    Language