Sign upLogin

avaframe/AvaFrame

View on GitHub
Star

Showing 633 of 942 total issues

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        zcoor = [coord[2] for coord in row['%s_Line' % nameEvent].coords]
Severity: Minor
Found in avaframe/out3Plot/amaPlots.py and 2 other locations - About 35 mins to fix
avaframe/out3Plot/amaPlots.py on lines 85..85
avaframe/out3Plot/amaPlots.py on lines 106..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

        avaPath['y'] = fullAvaPath['y'][int(start):int(end)]
Severity: Major
Found in avaframe/com2AB/com2AB.py and 4 other locations - About 35 mins to fix
avaframe/in2Trans/shpConversion.py on lines 416..416
avaframe/in2Trans/shpConversion.py on lines 417..417
avaframe/in2Trans/shpConversion.py on lines 418..419
avaframe/com2AB/com2AB.py on lines 140..140

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    featureOut['x'] = featureIn['x'][int(start):int(end)]
Severity: Major
Found in avaframe/in2Trans/shpConversion.py and 4 other locations - About 35 mins to fix
avaframe/in2Trans/shpConversion.py on lines 417..417
avaframe/in2Trans/shpConversion.py on lines 418..419
avaframe/com2AB/com2AB.py on lines 140..140
avaframe/com2AB/com2AB.py on lines 141..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    featureOut['y'] = featureIn['y'][int(start):int(end)]
Severity: Major
Found in avaframe/in2Trans/shpConversion.py and 4 other locations - About 35 mins to fix
avaframe/in2Trans/shpConversion.py on lines 416..416
avaframe/in2Trans/shpConversion.py on lines 418..419
avaframe/com2AB/com2AB.py on lines 140..140
avaframe/com2AB/com2AB.py on lines 141..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    indAlphaP1SD = np.argwhere(np.diff(np.sign(fplus1SD - z))).flatten()
Severity: Major
Found in avaframe/com2AB/com2AB.py and 5 other locations - About 35 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 300..300
avaframe/ana1Tests/energyLineTest.py on lines 310..310
avaframe/com2AB/com2AB.py on lines 395..395
avaframe/com2AB/com2AB.py on lines 397..397
avaframe/com2AB/com2AB.py on lines 398..398

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        idx = np.argwhere(np.diff(np.sign(z - alphaLine))).flatten()
Severity: Major
Found in avaframe/ana1Tests/energyLineTest.py and 5 other locations - About 35 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 300..300
avaframe/com2AB/com2AB.py on lines 395..395
avaframe/com2AB/com2AB.py on lines 396..396
avaframe/com2AB/com2AB.py on lines 397..397
avaframe/com2AB/com2AB.py on lines 398..398

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        zcoor = [coord[2] for coord in row['%s_Line' % nameEvent].coords]
Severity: Minor
Found in avaframe/out3Plot/amaPlots.py and 2 other locations - About 35 mins to fix
avaframe/out3Plot/amaPlots.py on lines 85..85
avaframe/out3Plot/amaPlots.py on lines 95..95

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    indAlphaM1SD = np.argwhere(np.diff(np.sign(fminus1SD - z))).flatten()
Severity: Major
Found in avaframe/com2AB/com2AB.py and 5 other locations - About 35 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 300..300
avaframe/ana1Tests/energyLineTest.py on lines 310..310
avaframe/com2AB/com2AB.py on lines 395..395
avaframe/com2AB/com2AB.py on lines 396..396
avaframe/com2AB/com2AB.py on lines 398..398

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

        avaPath['x'] = fullAvaPath['x'][int(start):int(end)]
Severity: Major
Found in avaframe/com2AB/com2AB.py and 4 other locations - About 35 mins to fix
avaframe/in2Trans/shpConversion.py on lines 416..416
avaframe/in2Trans/shpConversion.py on lines 417..417
avaframe/in2Trans/shpConversion.py on lines 418..419
avaframe/com2AB/com2AB.py on lines 141..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    indAlphaM2SD = np.argwhere(np.diff(np.sign(fminus2SD - z))).flatten()
Severity: Major
Found in avaframe/com2AB/com2AB.py and 5 other locations - About 35 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 300..300
avaframe/ana1Tests/energyLineTest.py on lines 310..310
avaframe/com2AB/com2AB.py on lines 395..395
avaframe/com2AB/com2AB.py on lines 396..396
avaframe/com2AB/com2AB.py on lines 397..397

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    idx = np.argwhere(np.diff(np.sign(z - alphaLine))).flatten()
Severity: Major
Found in avaframe/ana1Tests/energyLineTest.py and 5 other locations - About 35 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 310..310
avaframe/com2AB/com2AB.py on lines 395..395
avaframe/com2AB/com2AB.py on lines 396..396
avaframe/com2AB/com2AB.py on lines 397..397
avaframe/com2AB/com2AB.py on lines 398..398

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        zcoor = [coord[2] for coord in row['%s_Line' % nameEvent].coords]
Severity: Minor
Found in avaframe/out3Plot/amaPlots.py and 2 other locations - About 35 mins to fix
avaframe/out3Plot/amaPlots.py on lines 95..95
avaframe/out3Plot/amaPlots.py on lines 106..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    if 'z' in featureIn.keys():
        featureOut['z'] = featureIn['z'][int(start):int(end)]
Severity: Major
Found in avaframe/in2Trans/shpConversion.py and 4 other locations - About 35 mins to fix
avaframe/in2Trans/shpConversion.py on lines 416..416
avaframe/in2Trans/shpConversion.py on lines 417..417
avaframe/com2AB/com2AB.py on lines 140..140
avaframe/com2AB/com2AB.py on lines 141..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    indAlpha = np.argwhere(np.diff(np.sign(f - z))).flatten()
Severity: Major
Found in avaframe/com2AB/com2AB.py and 5 other locations - About 35 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 300..300
avaframe/ana1Tests/energyLineTest.py on lines 310..310
avaframe/com2AB/com2AB.py on lines 396..396
avaframe/com2AB/com2AB.py on lines 397..397
avaframe/com2AB/com2AB.py on lines 398..398

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if isinstance(simDF, str):
        simDF = simItemDF
    else:
        simDF = pd.concat([simDF, simItemDF], axis=0)
Severity: Minor
Found in avaframe/in3Utils/cfgUtils.py and 1 other location - About 35 mins to fix
avaframe/in3Utils/cfgUtils.py on lines 595..598

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if np.isnan(sortingParameter).any() and varParList[0] in ['relTh', 'entTh', 'secondaryRelTh']:
                sortingParameter = inputsDF[(varParList[0] + '0')].to_list() + sortingParameter
Severity: Minor
Found in avaframe/ana3AIMEC/aimecTools.py and 1 other location - About 35 mins to fix
avaframe/out3Plot/outAIMEC.py on lines 970..971

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    areaSum = resAnalysisDF.loc[refSimRowHash, 'TP'] + resAnalysisDF.loc[refSimRowHash, 'FN']
Severity: Minor
Found in avaframe/out3Plot/outAIMEC.py and 1 other location - About 35 mins to fix
avaframe/out3Plot/outAIMEC.py on lines 832..832

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    dz = np.diff(rasterTransfo['z'], prepend=rasterTransfo['z'][0])
Severity: Minor
Found in avaframe/ana3AIMEC/aimecTools.py and 1 other location - About 35 mins to fix
avaframe/ana3AIMEC/aimecTools.py on lines 1348..1348

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    ds = np.diff(rasterTransfo['s'], prepend=rasterTransfo['s'][0])
Severity: Minor
Found in avaframe/ana3AIMEC/aimecTools.py and 1 other location - About 35 mins to fix
avaframe/ana3AIMEC/aimecTools.py on lines 1347..1347

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if jMin * hTri < indy * csz:
            jMin = jMin + 1
Severity: Minor
Found in avaframe/com1DFA/particleTools.py and 1 other location - About 35 mins to fix
avaframe/com1DFA/particleTools.py on lines 182..183

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language