Sign upLogin

bizley/yii2-podium

View on GitHub
Star

Showing 419 of 419 total issues

Function addInheritedAdmin has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring.
Open

    protected function addInheritedAdmin()
    {
        if (empty($this->module->adminId)) {
            $this->type = self::TYPE_WARNING;
            return Yii::t('podium/flash', 'No administrator privileges have been set!');
Severity: Minor
Found in src/maintenance/Installation.php - About 45 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function emailCheck has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring.
Open

    public function emailCheck($warnings)
    {
        if ($warnings) {
            foreach ($warnings as $warning) {
                if ($warning === static::warnings()['email']) {
Severity: Minor
Found in src/controllers/BaseController.php - About 45 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($model->delete()) {
            PodiumCache::clearAfter('categoryDelete');
            Log::info('Category deleted', $model->id, __METHOD__);
            $this->success(Yii::t('podium/flash', 'Category has been deleted.'));
        } else {
Severity: Major
Found in src/controllers/AdminForumController.php and 2 other locations - About 45 mins to fix
src/controllers/AccountController.php on lines 100..107
src/controllers/AdminForumController.php on lines 128..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($model->activate()) {
            PodiumCache::clearAfter('activate');
            Log::info('Account activated', $model->id, __METHOD__);
            $this->success(Yii::t('podium/flash', 'Your account has been activated. You can sign in now.'));
        } else {
Severity: Major
Found in src/controllers/AccountController.php and 2 other locations - About 45 mins to fix
src/controllers/AdminForumController.php on lines 104..111
src/controllers/AdminForumController.php on lines 128..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($model->delete()) {
            PodiumCache::clearAfter('forumDelete');
            Log::info('Forum deleted', $model->id, __METHOD__);
            $this->success(Yii::t('podium/flash', 'Forum has been deleted.'));
        } else {
Severity: Major
Found in src/controllers/AdminForumController.php and 2 other locations - About 45 mins to fix
src/controllers/AccountController.php on lines 100..107
src/controllers/AdminForumController.php on lines 104..111

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            ['signature', 'filter', 'filter' => function ($value) {
                if (Podium::getInstance()->podiumConfig->get('use_wysiwyg') == '0') {
                    return HtmlPurifier::process(trim($value), Helper::podiumPurifierConfig('markdown'));
                }
                return HtmlPurifier::process(trim($value), Helper::podiumPurifierConfig());
Severity: Minor
Found in src/models/db/MetaActiveRecord.php and 1 other location - About 45 mins to fix
src/models/db/MessageActiveRecord.php on lines 99..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            ['content', 'filter', 'filter' => function($value) {
                if (Podium::getInstance()->podiumConfig->get('use_wysiwyg') == '0') {
                    return HtmlPurifier::process(trim($value), Helper::podiumPurifierConfig('markdown'));
                }
                return HtmlPurifier::process(trim($value), Helper::podiumPurifierConfig());
Severity: Minor
Found in src/models/db/MessageActiveRecord.php and 1 other location - About 45 mins to fix
src/models/db/MetaActiveRecord.php on lines 57..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($model->post_seen == Subscription::POST_NEW) {
            if ($model->seen()) {
                $this->success(Yii::t('podium/flash', 'Thread has been marked seen.'));
            } else {
                Log::error('Error while marking thread', $model->id, __METHOD__);
Severity: Minor
Found in src/controllers/ProfileController.php and 1 other location - About 40 mins to fix
src/controllers/ProfileController.php on lines 219..227

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($model->post_seen == Subscription::POST_SEEN) {
            if ($model->unseen()) {
                $this->success(Yii::t('podium/flash', 'Thread has been marked unseen.'));
            } else {
                Log::error('Error while marking thread', $model->id, __METHOD__);
Severity: Minor
Found in src/controllers/ProfileController.php and 1 other location - About 40 mins to fix
src/controllers/ProfileController.php on lines 228..236

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

The class Post has a coupling between objects value of 15. Consider to reduce the number of dependencies under 13.
Open

class Post extends PostActiveRecord
{
    /**
     * Returns latest posts for registered users.
     * @param int $limit Number of latest posts.
Severity: Minor
Found in src/models/Post.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class User has a coupling between objects value of 24. Consider to reduce the number of dependencies under 13.
Open

class User extends UserActiveRecord
{
    /**
     * Roles.
     */
Severity: Minor
Found in src/models/User.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class UserActiveRecord has a coupling between objects value of 13. Consider to reduce the number of dependencies under 13.
Open

abstract class UserActiveRecord extends ActiveRecord implements IdentityInterface
{
    /**
     * Statuses.
     */
Severity: Minor
Found in src/models/db/UserActiveRecord.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class AdminForumController has a coupling between objects value of 14. Consider to reduce the number of dependencies under 13.
Open

class AdminForumController extends BaseController
{
    /**
     * @inheritdoc
     */
Severity: Minor
Found in src/controllers/AdminForumController.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class ForumPostController has a coupling between objects value of 14. Consider to reduce the number of dependencies under 13.
Open

class ForumPostController extends ForumThreadController
{
    /**
     * @inheritdoc
     */
Severity: Minor
Found in src/controllers/ForumPostController.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class Thread has a coupling between objects value of 17. Consider to reduce the number of dependencies under 13.
Open

class Thread extends ThreadActiveRecord
{
    /**
     * Color classes.
     */
Severity: Minor
Found in src/models/Thread.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class ForumController has a coupling between objects value of 17. Consider to reduce the number of dependencies under 13.
Open

class ForumController extends ForumPostController
{
    /**
     * @inheritdoc
     */
Severity: Minor
Found in src/controllers/ForumController.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class ProfileController has a coupling between objects value of 15. Consider to reduce the number of dependencies under 13.
Open

class ProfileController extends BaseController
{
    /**
     * @inheritdoc
     */
Severity: Minor
Found in src/controllers/ProfileController.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

The class Podium has a coupling between objects value of 22. Consider to reduce the number of dependencies under 13.
Open

class Podium extends Module implements BootstrapInterface
{
    /**
     * @var int Admin account ID if $userComponent is not set to true.
     */
Severity: Minor
Found in src/Podium.php by phpmd

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

Method podiumUserTag has 5 arguments (exceeds 4 allowed). Consider refactoring.
Open

    public static function podiumUserTag($name, $role, $id = null, $slug = null, $simple = false)
Severity: Minor
Found in src/helpers/Helper.php - About 35 mins to fix

    Method addForeign has 5 arguments (exceeds 4 allowed). Consider refactoring.
    Open

        protected function addForeign($key, $ref, $col, $delete = null, $update = null)
    Severity: Minor
    Found in src/maintenance/SchemaOperation.php - About 35 mins to fix
      Severity
      Category
      Status
      Source
      Language