Showing 509 of 509 total issues
Similar blocks of code found in 7 locations. Consider refactoring. Open
@hadoop_config[:servernodes].each do |node|
export << I18n.t(".barclamp.hadoop_infrastructure.nodes.servernodes") + ", #{node.ip}, #{node.name}, #{node.cpu}, #{node.memory}, #{node.number_of_drives}"
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 7 locations. Consider refactoring. Open
@hadoop_config[:namenodes].each do |node|
export << I18n.t(".barclamp.hadoop_infrastructure.nodes.namenodes") + ", #{node.ip}, #{node.name}, #{node.cpu}, #{node.memory}, #{node.number_of_drives}"
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
master << nodes[0][:fqdn] if nodes[0][:fqdn]
slaves << nodes[1][:fqdn] if nodes[1][:fqdn]
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
namenodes << nodes[0][:fqdn] if nodes[0][:fqdn]
namenodes << nodes[1][:fqdn] if nodes[1][:fqdn]
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
directory path do
owner hdfs_owner
group hdfs_group
mode "0755"
recursive true
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
directory path do
owner mapred_owner
group hadoop_group
mode "0755"
recursive true
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
The name of this source file (zookeeper-server.rb
) should use snake_case. (https://github.com/bbatsov/ruby-style-guide#snake-case-files) Open
#
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop makes sure that Ruby source files have snake_case names. Ruby scripts (i.e. source files with a shebang in the first line) are ignored.
Example:
# bad
lib/layoutManager.rb
anything/usingCamelCase
# good
lib/layout_manager.rb
anything/using_snake_case.rake
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
default_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method
The name of this source file (hadoop_infrastructure-datanode.rb
) should use snake_case. (https://github.com/bbatsov/ruby-style-guide#snake-case-files) Open
#
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop makes sure that Ruby source files have snake_case names. Ruby scripts (i.e. source files with a shebang in the first line) are ignored.
Example:
# bad
lib/layoutManager.rb
anything/usingCamelCase
# good
lib/layout_manager.rb
anything/using_snake_case.rake
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
default_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method
Use 2 (not 0) spaces for indentation. (https://github.com/bbatsov/ruby-style-guide#spaces-indentation) Open
d.device
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cops checks for indentation that doesn't use the specified number of spaces.
See also the IndentationConsistency cop which is the companion to this one.
Example:
# bad
class A
def test
puts 'hello'
end
end
# good
class A
def test
puts 'hello'
end
end
Example: IgnoredPatterns: ['^\s*module']
# bad
module A
class B
def test
puts 'hello'
end
end
end
# good
module A
class B
def test
puts 'hello'
end
end
end
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
default_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
override_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
default_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method
Carriage return character detected. (https://github.com/bbatsov/ruby-style-guide#crlf) Open
#
# Cookbook: hadoop_infrastructure
- Create a ticketCreate a ticket
- Exclude checks
The name of this source file (hadoop_infrastructure-cb-adminnode.rb
) should use snake_case. (https://github.com/bbatsov/ruby-style-guide#snake-case-files) Open
#
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop makes sure that Ruby source files have snake_case names. Ruby scripts (i.e. source files with a shebang in the first line) are ignored.
Example:
# bad
lib/layoutManager.rb
anything/usingCamelCase
# good
lib/layout_manager.rb
anything/using_snake_case.rake
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
override_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method
Surrounding space missing for operator =
. (https://github.com/bbatsov/ruby-style-guide#spaces-operators) Open
disk[:uuid]=get_uuid disk[:name]
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks that operators have space around them, except for ** which should not have surrounding space.
Example:
# bad
total = 3*4
"apple"+"juice"
my_number = 38/4
a ** b
# good
total = 3 * 4
"apple" + "juice"
my_number = 38 / 4
a**b
Use &&
instead of and
. (https://github.com/bbatsov/ruby-style-guide#no-and-or-or) Open
if stat and stat.exited? and stat.exitstatus == 0
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for uses of and
and or
, and suggests using &&
and
|| instead
. It can be configured to check only in conditions, or in
all contexts.
Example: EnforcedStyle: always (default)
# bad
foo.save and return
# bad
if foo and bar
end
# good
foo.save && return
# good
if foo && bar
end
Example: EnforcedStyle: conditionals
# bad
if foo and bar
end
# good
foo.save && return
# good
foo.save and return
# good
if foo && bar
end
Do not use parentheses for method calls with no arguments. (https://github.com/bbatsov/ruby-style-guide#method-invocation-parens) Open
override_attributes()
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
This cop checks for unwanted parentheses in parameterless method calls.
Example:
# bad
object.some_method()
# good
object.some_method