Sign upLogin

department-of-veterans-affairs/vets-website

View on GitHub
Star

Showing 12,918 of 12,918 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      <a
        aria-current={isSelected ? 'page' : undefined}
        aria-label={label}
        className={classNames('va-sidenav-item-label', {
          'va-sidenav-item-label-bold': isFirstLevel,
Severity: Major
Found in src/platform/site-wide/side-nav/components/NavItemRow.js and 1 other location - About 1 hr to fix
src/platform/site-wide/side-nav/components/NavItemRow.js on lines 91..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  isItemIncomplete: item =>
    !item?.recipientRelationship ||
    !item.incomeType ||
    !item.grossMonthlyIncome ||
    !item.accountValue ||
Severity: Major
Found in src/applications/income-and-asset-statement/config/chapters/04-associated-incomes/associatedIncomePages.js and 1 other location - About 1 hr to fix
src/applications/pensions/config/chapters/05-financial-information/careExpensesPages.js on lines 34..39

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  formDOM.files = function fillFiles(id, files) {
    ReactTestUtils.Simulate.change(this.getElement(id), {
      target: {
        files,
      },
Severity: Major
Found in src/platform/testing/unit/schemaform-utils.jsx and 1 other location - About 1 hr to fix
src/platform/testing/unit/schemaform-utils.jsx on lines 252..258

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  useEffect(
    () => {
      if (
        appointmentDetailsStatus === FETCH_STATUS.failed ||
        (appointmentDetailsStatus === FETCH_STATUS.succeeded && !appointment)
Severity: Major
Found in src/applications/vaos/appointment-list/components/RequestedAppointmentDetailsPage.jsx and 1 other location - About 1 hr to fix
src/applications/vaos/appointment-list/components/ConfirmedAppointmentDetailsPage/index.jsx on lines 132..142

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const mapStateToProps = state => ({
  isLoading: isLoadingFeatures(state),
  canApply: isLoggedIn(state) && selectProfile(state).claims?.coe,
  showCoe: showCoeFeature(state),
});
Severity: Major
Found in src/applications/lgy/coe/form/containers/App.jsx and 1 other location - About 1 hr to fix
src/applications/_mock-form-ae-design-patterns/patterns/pattern2/TaskGray/form/containers/App.jsx on lines 68..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          <va-radio-option
            id="yes-conference"
            label={informalConferenceContactOptions.me}
            value="me"
            name="informalConference"
Severity: Major
Found in src/applications/appeals/996/components/InformalConferenceContact.jsx and 1 other location - About 1 hr to fix
src/applications/appeals/996/components/InformalConferenceContact.jsx on lines 114..121

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const PensionIncomeRemovalQuestionTitle = (
  <p>
    Did this dependent earn an income in the last 365 days? Answer this question{' '}
    <strong>only</strong> if you are removing this dependent from your{' '}
    <strong>pension</strong>.
Severity: Major
Found in src/applications/disability-benefits/686c-674/config/helpers.js and 1 other location - About 1 hr to fix
src/applications/disability-benefits/686c-674-v2/config/helpers.js on lines 232..238

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      default:
        // Navy or Marines
        return (
          <p className="va-address-block">
            Secretary of the Navy Council of Review Boards
Severity: Major
Found in src/applications/discharge-wizard/helpers/index.jsx and 1 other location - About 1 hr to fix
src/applications/discharge-wizard/helpers/index.jsx on lines 137..150

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      vaProfile: {
        status: 'OK',
        birthDate: '19490304',
        familyName: 'Jenkins',
        gender: 'M',
Severity: Major
Found in src/applications/personalization/common/mocks/users/index.js and 1 other location - About 1 hr to fix
src/applications/personalization/profile/mocks/endpoints/user/index.js on lines 1140..1150

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const claimantIdentificationDisplayOptions = Object.freeze({
  [claimantIdentificationKeys[0]]: 'Veteran',
  [claimantIdentificationKeys[1]]: 'Veteran’s spouse',
  [claimantIdentificationKeys[2]]: 'Veteran’s parent',
  [claimantIdentificationKeys[3]]: 'Veteran’s child',
Severity: Major
Found in src/applications/simple-forms/21-0972/definitions/constants.js and 1 other location - About 1 hr to fix
src/applications/simple-forms/21-0972/definitions/constants.js on lines 8..13

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      <ButtonsGroup
        onPrimaryClick={onUpdateClicked}
        onSecondaryClick={onBackToEditClick}
        primaryLabel={
          (deliveryPointValidation !== undefined &&
Severity: Major
Found in src/applications/personalization/profile/components/direct-deposit/vye/components/SuggestedAddress.jsx and 1 other location - About 1 hr to fix
src/applications/verify-your-enrollment/components/SuggestedAddress.jsx on lines 168..179

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  formDOM.setCheckbox = function toggleCheckbox(selector, checked) {
    ReactTestUtils.Simulate.change(this.getElement(selector), {
      target: {
        checked,
      },
Severity: Major
Found in src/platform/testing/unit/schemaform-utils.jsx and 1 other location - About 1 hr to fix
src/platform/testing/unit/schemaform-utils.jsx on lines 234..240

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const getConferenceTime = (formData = {}) => {
  const { informalConferenceTime = '' } = formData;
  return CONFERENCE_TIMES_V3[informalConferenceTime]?.submit || '';
};
Severity: Major
Found in src/applications/appeals/testing/hlr/utils/submit.js and 1 other location - About 1 hr to fix
src/applications/appeals/996/utils/submit.js on lines 44..47

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          {shouldPaginate && (
            <VaPagination
              className="vads-u-border--0"
              page={currentPage}
              pages={numPages}
Severity: Major
Found in src/applications/claims-status/components/claim-files-tab/DocumentsFiled.jsx and 1 other location - About 1 hr to fix
src/applications/claims-status/components/claim-status-tab/RecentActivity.jsx on lines 236..243

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const isReviewInstance = () => {
  const { hostname } = window.location;
  const globalRegex = new RegExp('review.vetsgov-internal', 'g');
  return globalRegex.test(hostname);
};
Severity: Major
Found in src/applications/gi/utils/helpers.js and 1 other location - About 1 hr to fix
src/applications/gi/utils/helpers.js on lines 472..479

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          {showBlockedTriageGroupAlert &&
            (!noAssociations && !allTriageGroupsBlocked) && (
              <div
                className="
                  vads-u-border-top--1px
Severity: Major
Found in src/applications/mhv-secure-messaging/components/ComposeForm/ComposeForm.jsx and 1 other location - About 1 hr to fix
src/applications/mhv-secure-messaging/components/MessageThreadHeader.jsx on lines 143..151

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 6 locations. Consider refactoring.
Open

  useEffect(() => {
    document.title = `${pageTitle} | Veterans Affairs`;
    scrollAndFocus();
    if (featureBreadcrumbUrlUpdate) {
      changeCrumb(pageTitle);
Severity: Major
Found in src/applications/vaos/covid-19-vaccine/components/ReviewPage.jsx and 5 other locations - About 55 mins to fix
src/applications/vaos/covid-19-vaccine/components/ConfirmationPageV2.jsx on lines 48..54
src/applications/vaos/covid-19-vaccine/components/PlanAheadPage.jsx on lines 27..33
src/applications/vaos/covid-19-vaccine/components/SecondDosePage.jsx on lines 31..37
src/applications/vaos/new-appointment/components/DateTimeRequestPage/VA.jsx on lines 68..74
src/applications/vaos/new-appointment/components/DateTimeRequestPage/index.jsx on lines 68..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 22 locations. Consider refactoring.
Open

export default function App({ location, children }) {
  return (
    <RoutedSavableApp formConfig={formConfig} currentLocation={location}>
      {children}
    </RoutedSavableApp>
Severity: Major
Found in src/applications/simple-forms/40-0247/containers/App.jsx and 21 other locations - About 55 mins to fix
src/applications/_mock-form/containers/App.jsx on lines 6..12
src/applications/edu-benefits/10215/containers/App.jsx on lines 6..12
src/applications/edu-benefits/10216/containers/App.jsx on lines 6..12
src/applications/edu-benefits/1919/containers/App.jsx on lines 6..12
src/applications/edu-benefits/8794/containers/App.jsx on lines 6..12
src/applications/mock-sip-form/containers/App.jsx on lines 6..12
src/applications/personalization/review-information/containers/App.jsx on lines 6..12
src/applications/sah/sahg/containers/App.jsx on lines 6..12
src/applications/simple-forms/21-0845/containers/App.jsx on lines 9..15
src/applications/simple-forms/21-0966/containers/App.jsx on lines 6..12
src/applications/simple-forms/21-0972/containers/App.jsx on lines 9..15
src/applications/simple-forms/21-10210/containers/App.jsx on lines 7..13
src/applications/simple-forms/21-4142/containers/App.jsx on lines 6..12
src/applications/simple-forms/21P-0847/containers/App.jsx on lines 6..12
src/applications/simple-forms/26-4555/containers/App.jsx on lines 6..12
src/applications/simple-forms/mock-form-minimal-header/containers/App.jsx on lines 6..12
src/applications/simple-forms/mock-simple-forms-patterns/containers/App.jsx on lines 6..12
src/applications/travel-pay/containers/App.jsx on lines 6..12
src/applications/ask-a-question/App.jsx on lines 6..12
src/applications/edu-benefits/0993/Form0993App.jsx on lines 6..12
src/applications/edu-benefits/10203/Form10203App.jsx on lines 6..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 22 locations. Consider refactoring.
Open

export default function App({ location, children }) {
  return (
    <RoutedSavableApp formConfig={formConfig} currentLocation={location}>
      {children}
    </RoutedSavableApp>
Severity: Major
Found in src/applications/personalization/review-information/containers/App.jsx and 21 other locations - About 55 mins to fix
src/applications/_mock-form/containers/App.jsx on lines 6..12
src/applications/edu-benefits/10215/containers/App.jsx on lines 6..12
src/applications/edu-benefits/10216/containers/App.jsx on lines 6..12
src/applications/edu-benefits/1919/containers/App.jsx on lines 6..12
src/applications/edu-benefits/8794/containers/App.jsx on lines 6..12
src/applications/mock-sip-form/containers/App.jsx on lines 6..12
src/applications/sah/sahg/containers/App.jsx on lines 6..12
src/applications/simple-forms/21-0845/containers/App.jsx on lines 9..15
src/applications/simple-forms/21-0966/containers/App.jsx on lines 6..12
src/applications/simple-forms/21-0972/containers/App.jsx on lines 9..15
src/applications/simple-forms/21-10210/containers/App.jsx on lines 7..13
src/applications/simple-forms/21-4142/containers/App.jsx on lines 6..12
src/applications/simple-forms/21P-0847/containers/App.jsx on lines 6..12
src/applications/simple-forms/26-4555/containers/App.jsx on lines 6..12
src/applications/simple-forms/40-0247/containers/App.jsx on lines 9..15
src/applications/simple-forms/mock-form-minimal-header/containers/App.jsx on lines 6..12
src/applications/simple-forms/mock-simple-forms-patterns/containers/App.jsx on lines 6..12
src/applications/travel-pay/containers/App.jsx on lines 6..12
src/applications/ask-a-question/App.jsx on lines 6..12
src/applications/edu-benefits/0993/Form0993App.jsx on lines 6..12
src/applications/edu-benefits/10203/Form10203App.jsx on lines 6..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 6 locations. Consider refactoring.
Open

  useEffect(() => {
    document.title = `${pageTitle} | Veterans Affairs`;
    scrollAndFocus();
    if (featureBreadcrumbUrlUpdate) {
      changeCrumb(pageTitle);
Severity: Major
Found in src/applications/vaos/covid-19-vaccine/components/ConfirmationPageV2.jsx and 5 other locations - About 55 mins to fix
src/applications/vaos/covid-19-vaccine/components/PlanAheadPage.jsx on lines 27..33
src/applications/vaos/covid-19-vaccine/components/ReviewPage.jsx on lines 49..55
src/applications/vaos/covid-19-vaccine/components/SecondDosePage.jsx on lines 31..37
src/applications/vaos/new-appointment/components/DateTimeRequestPage/VA.jsx on lines 68..74
src/applications/vaos/new-appointment/components/DateTimeRequestPage/index.jsx on lines 68..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language