ece517-p3/expertiza

class Course < ActiveRecord::Base

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

class FeedbackResponseMap < ResponseMap

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

      @menu_item.update_attributes :seq, (@menu_item.seq - 1)

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

class PlagiarismCheckerComparison < ActiveRecord::Base

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

                            <td align='left'><p style="color: <%= col_color %>"><%= answer.comments.html_safe unless answer.comments.nil? %></p></td>

Close

Cross-site scripting (or XSS) is #3 on the 2013 [OWASP Top Ten](https://www.owasp.org/index.php/Top_10_2013-A3-Cross-Site_Scripting_(XSS\)) web security risks and it pops up nearly everywhere.

XSS occurs when a user-controlled value is displayed on a web page without properly escaping it, allowing someone to inject Javascript or HTML into the page which will be interpreted and executed by the browser..

In Rails 2.x, values need to be explicitly escaped (e.g., by using the h method). Since Rails 3.x, auto-escaping in views is enabled by default. However, one can still use the raw or html_safe methods to output a value directly.

See the Ruby Security Guide for more details.

Query Parameters and Cookies

ERB example:

<%= params[:query].html_safe %>

Brakeman looks for several situations that can allow XSS. The simplest is like the example above: a value from the params or cookies is being directly output to a view. In such cases, it will issue a warning like:

Unescaped parameter value near line 3: params[:query]

By default, Brakeman will also warn when a parameter or cookie value is used as an argument to a method, the result of which is output unescaped to a view.

For example:

<%= raw some_method(cookie[:name]) %>

This raises a warning like:

Unescaped cookie value near line 5: some_method(cookies[:oreo])

However, the confidence level for this warning will be weak, because it is not directly outputting the cookie value.

Some methods are known to Brakeman to either be dangerous (link_to is one) or safe (escape_once). Users can specify safe methods using the --safe-methods option. Alternatively, Brakeman can be set to only warn when values are used directly with the --report-direct option.

Model Attributes

Because (many) models come from database values, Brakeman mistrusts them by default.

For example, if @user is an instance of a model set in an action like

def set_user
  @user = User.first
end

and there is a view with

<%= @user.name.html_safe %>

Brakeman will raise a warning like

Unescaped model attribute near line 3: User.first.name

If you trust all your data (although you probably shouldn't), this can be disabled with --ignore-model-output.

class AssignmentSurveyQuestionnaire < SurveyQuestionnaire

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

class CalculatedPenalty < ActiveRecord::Base

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

class CourseNode < Node

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

class Language < ActiveRecord::Base

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

class Questionnaire < ActiveRecord::Base

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

    @suggestion = Suggestion.new(suggestion_params)

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

    user = User.new(attributes)

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

      @questionnaire.update_attributes(questionnaire_params)

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

      @questionnaire.update_attributes(questionnaire_params)

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

                  <%= link_to image_tag('external-link-16.png', :border => 0, :align => 'middle'), topic.link, :target=>'_blank' %>

Close

Even though Rails will escape the link provided to link_to, values starting with javascript: or data: are unescaped and dangerous.

Brakeman will warn on if user values are used to provide the HREF value in link_to or if they are interpolated at the beginning of a string.

The --url-safe-methods option can be used to specify methods which make URLs safe.

See here for more details.

class PasswordReset < ActiveRecord::Base

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

class QuestionnaireNode < Node

Close

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

    @site_controller = SiteController.new(params[:site_controller])

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

    params.permit!

Close

Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

    @questionnaire = Object.const_get(params[:questionnaire][:type]).new(questionnaire_params)

Close

Brakeman reports on several cases of remote code execution, in which a user is able to control and execute code in ways unintended by application authors.

The obvious form of this is the use of eval with user input.

However, Brakeman also reports on dangerous uses of send, constantize, and other methods which allow creation of arbitrary objects or calling of arbitrary methods.