kubernetes/helm/values.yaml
# COMMON
# ------------------------------------------------------------------------------
prefix: proxy
httpPort: 50080
httpsPort: 50443
redisPort: 6379
serviceAccount:
# Specifies whether a service account should be created
create: true
# Annotations to add to the service account
annotations: {}
# The name of the service account to use.
# If not set and create is true, a name is generated using the fullname template
name: ""
# REDIS
# ------------------------------------------------------------------------------
redis:
enabled: true
replicaCount: 1
image:
pullPolicy: IfNotPresent
# Overrides the image tag whose default is the chart appVersion.
tag: 6.2.6-alpine3.15
imagePullSecrets: []
podAnnotations: {}
podSecurityContext: {}
# fsGroup: 2000
securityContext: {}
# capabilities:
# drop:
# - ALL
# readOnlyRootFilesystem: true
# runAsNonRoot: true
# runAsUser: 1000
service:
port: 6379
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
# resources, such as Minikube. If you do want to specify resources, uncomment the following
# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
# limits:
# cpu: 100m
# memory: 128Mi
# requests:
# cpu: 100m
# memory: 128Mi
autoscaling:
enabled: false
minReplicas: 1
maxReplicas: 100
targetCPUUtilizationPercentage: 80
# targetMemoryUtilizationPercentage: 80
nodeSelector: {}
tolerations: []
affinity: {}
config: |
bind 0.0.0.0
# GOPROXYCACHE
# ------------------------------------------------------------------------------
goproxycache:
replicaCount: 1
image:
pullPolicy: IfNotPresent
# Overrides the image tag whose default is the chart appVersion.
tag: latest
imagePullSecrets: []
podAnnotations: {}
podSecurityContext: {}
# fsGroup: 2000
securityContext: {}
# capabilities:
# drop:
# - ALL
# readOnlyRootFilesystem: true
# runAsNonRoot: true
# runAsUser: 1000
service:
httpPort: 50080
httpsPort: 50443
resources: {}
# We usually recommend not to specify default resources and to leave this as a conscious
# choice for the user. This also increases chances charts run on environments with little
# resources, such as Minikube. If you do want to specify resources, uncomment the following
# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
# limits:
# cpu: 100m
# memory: 128Mi
# requests:
# cpu: 100m
# memory: 128Mi
autoscaling:
enabled: false
minReplicas: 1
maxReplicas: 100
targetCPUUtilizationPercentage: 80
# targetMemoryUtilizationPercentage: 80
nodeSelector: {}
tolerations: []
affinity: {}
config: |
### GLOBAL CONFIGURATION
################################################################################
server:
# --- GENERIC
port:
http: "50080"
https: "50443"
# --- GZIP
# Automatically enable GZip compression on all requests.
gzip: false
# --- INTERNALS
internals:
# Internal listening Address for metrics and healthchecks.
# Default: 127.0.0.1
listening_address: "127.0.0.1"
# Internal listening port for metrics and healthchecks.
# Default: 52021
listening_port: 52021
# --- TLS
tls:
# Automatic Certificate Management Environment
# Provides automatic generation of SSL/TLS certificates from Let's Encrypt
# and any other ACME-based CA.
# Default: false (need to provide `cert_file` and `key_file`)
auto: false
# Email optionally specifies a contact email address.
# This is used by CAs, such as Let's Encrypt, to notify about problems with
# issued certificates.
email: noreply@example.com
# Pair or files: the certificate and the key.
# Used by LoadX509KeyPair to read and parse a public/private key pair from a
# pair of files. The files must contain PEM encoded data. The certificate
# file may contain intermediate certificates following the leaf certificate
# to form a certificate chain.
cert_file: ~
key_file: ~
# WARNING: INTERNAL SERVER BEHAVIOUR
override:
# CipherSuites is a list of supported cipher suites for TLS versions up to
# TLS 1.2. If CipherSuites is nil, a default list of secure cipher suites
# is used, with a preference order based on hardware performance. The
# default cipher suites might change over Go versions. Note that TLS 1.3
# ciphersuites are not configurable.
#
# Value Description DLTS-OK IANA Recommended
# ------------------------------------------------------------------------------------
# TLS 1.0 - 1.2 cipher suites.
# 5 = TLS_RSA_WITH_RC4_128_SHA N N
# 10 = TLS_RSA_WITH_3DES_EDE_CBC_SHA Y N
# 47 = TLS_RSA_WITH_AES_128_CBC_SHA Y N
# 53 = TLS_RSA_WITH_AES_256_CBC_SHA Y N
# 60 = TLS_RSA_WITH_AES_128_CBC_SHA256 Y N
# 156 = TLS_RSA_WITH_AES_128_GCM_SHA256 Y N
# 157 = TLS_RSA_WITH_AES_256_GCM_SHA384 Y N
# 49159 = TLS_ECDHE_ECDSA_WITH_RC4_128_SHA N N
# 49161 = TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA Y N
# 49162 = TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA Y N
# 49169 = TLS_ECDHE_RSA_WITH_RC4_128_SHA N N
# 49170 = TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA Y N
# 49171 = TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA Y N
# 49172 = TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA Y N
# 49187 = TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 Y N
# 49191 = TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 Y N
# 49199 = TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 Y Y
# 49195 = TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 Y Y
# 49200 = TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 Y Y
# 49196 = TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 Y Y
# 52392 = TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 Y Y
# 52392 = TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 Y Y
# 52393 = TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 Y Y
# 52393 = TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305 Y Y
#
# TLS 1.3 cipher suites.
# 4865 = TLS_AES_128_GCM_SHA256 Y Y
# 4866 = TLS_AES_256_GCM_SHA384 Y Y
# 4867 = TLS_CHACHA20_POLY1305_SHA256 Y Y
#
# TLS_FALLBACK_SCSV isn't a standard cipher suite but an indicator
# that the client is doing version fallback. See RFC 7507.
# 22016 = TLS_FALLBACK_SCSV Y N
#
# More details on:
# https://www.iana.org/assignments/tls-parameters/tls-parameters.xml
# https://blogs.sap.com/2018/12/09/perfect-forward-secrecy-and-how-to-choose-pfs-based-cipher-suites/
ciphersuites:
- 49200 # TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- 49196 # TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- 52393 # TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
- 52392 # TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
# needed by HTTP/2
- 4865 # TLS_AES_128_GCM_SHA256
- 49199 # TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- 49195 # TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
# MinVersion contains the minimum TLS version that is acceptable.
# If zero, TLS 1.0 is currently taken as the minimum.
# 769 = VersionTLS10
# 770 = VersionTLS11
# 771 = VersionTLS12
# 772 = VersionTLS13
minversion: 771 # VersionTLS12
# MaxVersion contains the maximum TLS version that is acceptable.
# If zero, the maximum version supported by this package is used,
# which is currently TLS 1.3.
# 769 = VersionTLS10
# 770 = VersionTLS11
# 771 = VersionTLS12
# 772 = VersionTLS13
maxversion: 772 # VersionTLS13
# CurvePreferences contains the elliptic curves that will be used in
# an ECDHE handshake, in preference order. If empty, the default will
# be used. The client will use the first preference as the type for
# its key share in TLS 1.3. This may change in the future.
# CurveID is the type of a TLS identifier for an elliptic curve. See
# https://www.iana.org/assignments/tls-parameters/tls-parameters.xml#tls-parameters-8.
#
# In TLS 1.3, this type is called NamedGroup, but at this time this library
# only supports Elliptic Curve based groups. See RFC 8446, Section 4.2.7.
# 23 = CurveP256
# 24 = CurveP384
# 25 = CurveP521
# 29 = X25519
#
# Only use curves which have assembly implementations
# https://github.com/golang/go/tree/master/src/crypto/elliptic
curvepreferences:
- 23 # CurveP256
# --- TIMEOUT
timeout:
# It is the maximum duration for reading the entire request, including the
# body.
# Because it does not let Handlers make per-request decisions on each
# request body's acceptable deadline or upload rate, most users will prefer
# to use `read_header`. It is valid to use them both.
read: 5s
# It is the amount of time allowed to read request headers. The connection's
# read deadline is reset after reading the headers and the Handler can
# decide what is considered too slow for the body. If it is zero, the value
# of `read` is used. If both are zero, there is no timeout.
read_header: 2s
# It is the maximum duration before timing out writes of the response. It is
# reset whenever a new request's header is read. Like `read`, it does not
# let Handlers make decisions on a per-request basis.
write: 5s
# It is the maximum amount of time to wait for the next request when
# keep-alives are enabled. If is zero, the value of `read` is used. If both
# ara zero, there is no timeout.
idle: 20s
# It runs the handler with the given time limit.
handler: 5s
# --- FORWARDING
upstream:
# Hostname to be used for requests forwarding.
host: ~
# Port to be used for requests forwarding.
# Default: incoming connection.
# Values: 80, 443.
port: 443
# Endpoint scheme to be used when forwarding traffic.
# Default: incoming connection.
# Values: http, https, ws, wss.
scheme: ~
# Load Balancing Algorithm to be used when present multiple endpoints.
# Default: round-robin
# Allowed formats: ip-hash, least-connections, random, round-robin.
balancing_algorithm: round-robin
# List of IPs/Hostnames to be used as load balanced backend servers.
# They'll be selected using the chosen algorithm (or round-robin).
# Allowed formats: IPv4, IPv4:port
endpoints:
- 127.0.0.1
- 127.0.1.2:443
# Forces redirect from HTTP to HTTPS.
# Default: false
http_to_https: true
# This allows to have communication between the proxy and the upstream in
# case of invalid TLS certificate.
# Can be disabled in the global config.
# Default: false
insecure_bridge: false
# Status code to be used when redirecting HTTP to HTTPS.
# Default: 301
redirect_status_code: 301
health_check:
# Status codes for healthy node.
# A list of space-separated status codes.
status_codes:
- 200
# Timeout request time.
timeout: ~
# Interval frequency for health checks.
interval: ~
# Port to be used for requests forwarding.
# Default: incoming connection.
# Values: 80, 443.
port: 443
# Fallback scheme if endpoint doesn't provide it.
scheme: https
# Allow healthchecks on self-signed TLS certificates (or expired/invalid).
# Default: false
allow_insecure: false
# --- CACHE
cache:
# --- REDIS SERVER
host: prod-cache-redis.default.svc.cluster.local
port: "6379"
password: ~
db: 0
# --- TTL
# Fallback storage TTL when saving the cache when no header is specified.
# It follows the order:
# - If the cache is shared and the s-maxage response directives present, use
# its value, or
# - If the max-age response directive is present, use its value, or
# - If the Expires response header field is present, use its value minus the
# value of the Date response header field, or
# - Otherwise, no explicit expiration time is present in the response.
# A heuristic freshness lifetime might be applicable.
# Default: 0
ttl: 0
# --- ALLOWED VALUES
# Allows caching for different response codes.
# Default: 200, 301, 302
allowed_statuses:
- 200
- 301
- 302
# Allows caching for different HTTP methods.
# If the client request method is listed in this directive then the response
# will be cached. "GET" and "HEAD" methods are always added to the list,
# though it is recommended to specify them explicitly.
# Default: HEAD, GET
allowed_methods:
- HEAD
- GET
# --- CIRCUIT BREAKER
# WARNING: INTERNAL SERVER BEHAVIOUR
circuit_breaker:
# Will start evaluating the failures after n requests as defined by the
# threshold.
threshold: 0
# It'll open the circuit after `threshold` requests which are greater or
# equal to the failure rate defined
# (total failures / total requests).
failurerate: 0
# Interval is the cyclic period of the closed state
# for the CircuitBreaker to clear the internal Counts.
# If Interval is 0, the CircuitBreaker doesn't clear internal Counts during
# the closed state.
interval: 0s
# Timeout is the period of the open state,
# after which the state of the CircuitBreaker becomes half-open.
# If Timeout is 0, the timeout value of the CircuitBreaker is set to 60
# seconds.
timeout: 0s
# MaxRequests is the maximum number of requests allowed to pass through
# when the CircuitBreaker is half-open.
# If MaxRequests is 0, the CircuitBreaker allows only 1 request.
maxrequests: 0
# --- LOG
log:
# Ref: https://golang.org/src/time/format.go
time_format: "2006/01/02 15:04:05"
# Available variables:
# - $host = request host
# - $remote_addr = request remote addr
# - $remote_user = -
# - $time_local = local time with format of `time_format`
# - $protocol = protocol
# - $request_method = method
# - $request = full URI
# - $status = status code
# - $body_bytes_sent = number of bytes in content body
# - $http_referer = referer
# - $http_user_agent = user agent
# - $cached_status = cache flag
# - $cached_status_label = cached flag label (HIT/MISS/STALE)
format: $host - $remote_addr - $remote_user $protocol $request_method "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent" $cached_status
# Sentry DSN
# All errors will be tracked and sent to Sentry.
# Logged levels: warning, error, fatal, panic.
# Default (empty)
sentry_dsn: ~
# Syslog Protocol
# If no protocol and no endpoint is specified, all the logs will be sent to
# the local syslog.
# Default (empty)
syslog_protocol: ~
# Syslog Endpoint
# If no protocol and no endpoint is specified, all the logs will be sent to
# the local syslog.
# All errors will be tracked and sent to syslog.
# Logged levels: warning, error, critical, alert, emergency.
# Default (empty)
syslog_endpoint: ~
# --- TRACING
tracing:
# Endpoint for Local Jaeger Agent (eg: jaeger:6831)
jaeger_endpoint: ~
# Enable/Disable the tracing.
enabled: false
# Set the sampling ratio for tracing (float).
# Default: 1.0
sampling_ratio: 1.0
### PER DOMAIN CONFIGURATION OVERRIDE
################################################################################
domains:
example_com:
server:
upstream:
host: example.com
example_org:
server:
upstream:
host: example.org