Showing 135 of 135 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
<?php
/**
* MIT License.
*
* Copyright (c) 2019. Felix Huber
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 293.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
<?php
/**
* MIT License.
*
* Copyright (c) 2019. Felix Huber
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 293.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private function getSlackKMStringPartial($character_id, $corporation_id, $ship_type_id, $alliance_id): string
{
$character = is_null($character_id) ? null : $this->resolveID($character_id);
$corporation = is_null($corporation_id) ? null : $this->resolveID($corporation_id);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 221.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private function getDiscordKMStringPartial($character_id, $corporation_id, $ship_type_id, $alliance_id): string
{
$character = is_null($character_id) ? null : $this->resolveID($character_id);
$corporation = is_null($corporation_id) ? null : $this->resolveID($corporation_id);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 221.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
The class SlackMessage has 13 public methods. Consider refactoring SlackMessage to keep number of public methods under 10. Open
class SlackMessage
{
/**
* The "level" of the notification (info, success, warning, error).
*
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class SlackAttachment has 13 public methods. Consider refactoring SlackAttachment to keep number of public methods under 10. Open
class SlackAttachment
{
use InteractsWithTime;
/**
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
Method callback
has 69 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function callback(Request $request)
{
// get back pending OAuth credentials validation from session
$credentials = $request->session()->get('herpaderp.seatnotifications.discord.credentials');
Similar blocks of code found in 2 locations. Consider refactoring. Open
private function isValidCallback($session_content)
{
$expected_array_keys = ['state', 'client_id', 'client_secret', 'verification_token'];
$i = count($expected_array_keys);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 126.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private function isValidCallback($session_content)
{
$expected_array_keys = ['state', 'client_id', 'client_secret', 'bot_token'];
$i = count($expected_array_keys);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 126.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid excessively long variable names like $subscribed_corporation_ids. Keep variable name length under 20. Open
private $subscribed_corporation_ids;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $subscribed_character_ids. Keep variable name length under 20. Open
private $subscribed_character_ids;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $subscribed_corporations. Keep variable name length under 20. Open
$subscribed_corporations = NotificationSubscription::where('notification', AbstractKillMailNotification::class)
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $affiliation_JSON_action. Keep variable name length under 20. Open
public function __construct(BuildAffiliationJSONAction $affiliation_JSON_action)
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $get_filter_list_action. Keep variable name length under 20. Open
public function getFilterList(FilterRequest $filter_request, GetFilterListAction $get_filter_list_action)
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $get_corporation_filter. Keep variable name length under 20. Open
private $get_corporation_filter;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $victim_corporation_id. Keep variable name length under 20. Open
$victim_corporation_id = optional($this->killmail_detail->victims)->corporation_id;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $get_corporation_filter. Keep variable name length under 20. Open
public function __construct(GetCorporationFilter $get_corporation_filter, GetCharacterFilter $get_character_filter)
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $affiliation_JSON_action. Keep variable name length under 20. Open
protected $affiliation_JSON_action;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $attacker_corporation_ids. Keep variable name length under 20. Open
$attacker_corporation_ids = $this->killmail_detail
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $notification_channels. Keep variable name length under 20. Open
$notification_channels = config('services.seat-notification-channel');
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}