Sign upLogin

jjsoft-ar/siges-core

View on GitHub
Star

Showing 72 of 72 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php

namespace JJSoft\SigesCore\Field\Email;

use Field;
Severity: Major
Found in src/Field/Email/EmailFieldType.php and 1 other location - About 4 hrs to fix
src/Field/TextArea/TextAreaFieldType.php on lines 1..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 126.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php

namespace JJSoft\SigesCore\Field\TextArea;

use Field;
Severity: Major
Found in src/Field/TextArea/TextAreaFieldType.php and 1 other location - About 4 hrs to fix
src/Field/Email/EmailFieldType.php on lines 1..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 126.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function store(CreateFieldRequest $request, $id)
    {
        $data = $request->all();
        $data['entity_id'] = $id;
        $field = $this->generateField($data);
Severity: Major
Found in src/Http/Controllers/Core/FieldsController.php and 1 other location - About 2 hrs to fix
src/Http/Controllers/Core/FieldsController.php on lines 87..95

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 91.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function update(EditFieldRequest $request, $id, $fields)
    {
        $data = $request->all();
        $data['id'] = $fields;
        $field = $this->editField($data);
Severity: Major
Found in src/Http/Controllers/Core/FieldsController.php and 1 other location - About 2 hrs to fix
src/Http/Controllers/Core/FieldsController.php on lines 59..67

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 91.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function setRowId($id, $column = 'id')
    {
        $this->entry = DB::table($this->entity->getTableName())->where($column, $id)->first();
        foreach ($this->types as $field) {
            $field->setValue($this->entry->{$field->fieldSlug});
Severity: Major
Found in src/UI/Field/EntityFieldPresenter.php and 1 other location - About 2 hrs to fix
src/UI/Field/EntityFieldsFormBuilder.php on lines 45..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function setRowId($id, $column = "id")
    {
        $this->entry = DB::table($this->entity->getTableName())->where($column, $id)->first();
        foreach ($this->types as $field) {
            $field->setValue($this->entry->{$field->fieldSlug});
Severity: Major
Found in src/UI/Field/EntityFieldsFormBuilder.php and 1 other location - About 2 hrs to fix
src/UI/Field/EntityFieldPresenter.php on lines 50..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php

namespace JJSoft\SigesCore\Entries\Events;

use JJSoft\SigesCore\Events\Event;
Severity: Major
Found in src/Entries/Events/EntryWasInserted.php and 1 other location - About 2 hrs to fix
src/Entries/Events/EntryWasUpdated.php on lines 1..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 71.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php

namespace JJSoft\SigesCore\Entries\Events;

use JJSoft\SigesCore\Events\Event;
Severity: Major
Found in src/Entries/Events/EntryWasUpdated.php and 1 other location - About 2 hrs to fix
src/Entries/Events/EntryWasInserted.php on lines 1..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 71.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method __construct has 13 arguments (exceeds 4 allowed). Consider refactoring.
Open

        $entity_id = "",
        $namespace = "",
        $name = "",
        $description = "",
        $slug = "",
Severity: Major
Found in src/FieldGenerator/CreateFieldCommand.php - About 1 hr to fix

    Identical blocks of code found in 3 locations. Consider refactoring.
    Open

        public function execute($command, callable $next)
    {
        $validator = Validator::make((array) $command, $this->rules);
        if ($validator->fails()) {
            throw new FieldValidationException($validator);
    Severity: Major
    Found in src/FieldGenerator/Middleware/EditFieldTypeValidator.php and 2 other locations - About 1 hr to fix
    src/EntityGenerator/Middleware/EntityGeneratorValidator.php on lines 48..55
    src/FieldGenerator/Middleware/FieldGeneratorValidator.php on lines 33..40

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 60.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 3 locations. Consider refactoring.
    Open

        public function execute($command, callable $next)
    {
        $validator = Validator::make((array) $command, $this->rules);
        if ($validator->fails()) {
            throw new CommandValidationException($validator);
    Severity: Major
    Found in src/EntityGenerator/Middleware/EntityGeneratorValidator.php and 2 other locations - About 1 hr to fix
    src/FieldGenerator/Middleware/EditFieldTypeValidator.php on lines 27..34
    src/FieldGenerator/Middleware/FieldGeneratorValidator.php on lines 33..40

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 60.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 3 locations. Consider refactoring.
    Open

        public function execute($command, callable $next)
    {
        $validator = Validator::make((array) $command, $this->rules);
        if ($validator->fails()) {
            throw new FieldValidationException($validator);
    Severity: Major
    Found in src/FieldGenerator/Middleware/FieldGeneratorValidator.php and 2 other locations - About 1 hr to fix
    src/EntityGenerator/Middleware/EntityGeneratorValidator.php on lines 48..55
    src/FieldGenerator/Middleware/EditFieldTypeValidator.php on lines 27..34

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 60.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    <?php

namespace JJSoft\SigesCore\Notifications\SendAppNotification\Handler;

use JJSoft\SigesCore\Notifications\SendAppNotification\Notification;
    Severity: Major
    Found in src/Notifications/SendAppNotification/Handler/SendAppNotificationCommandHandler.php and 1 other location - About 1 hr to fix
    src/EntityGenerator/Handler/EntityGeneratorHandler.php on lines 1..25

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    <?php

namespace JJSoft\SigesCore\EntityGenerator\Handler;

use JJSoft\SigesCore\EntityGenerator\EntityModel;
    Severity: Major
    Found in src/EntityGenerator/Handler/EntityGeneratorHandler.php and 1 other location - About 1 hr to fix
    src/Notifications/SendAppNotification/Handler/SendAppNotificationCommandHandler.php on lines 1..16

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            return '
            <li ' . $this->getActiveStateOnChild($item, ' active') . '>
                <a>' . $item->getIcon() . ' ' . $item->title . ' <span class="fa fa-chevron-down"></span></a>
                <ul class="nav child_menu">
                    ' . $this->getChildMenuItems($item) . '
    Severity: Major
    Found in src/Menu/Presenters/SidebarMenuPresenter.php and 1 other location - About 1 hr to fix
    src/Menu/Presenters/SidebarMenuPresenter.php on lines 44..52

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 53.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            return '<li class="'.$this->getActiveStateOnChild($item, ' active').'">
                  <a href="#">
                    '.$item->getIcon().' '.$item->title.'
                      <i class="fa fa-angle-left pull-right"></i>
                  </a>
    Severity: Major
    Found in src/Menu/Presenters/SidebarMenuPresenter.php and 1 other location - About 1 hr to fix
    src/Menu/Presenters/SidebarMenuPresenter.php on lines 22..28

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 53.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        public function generateField(array $data = [])
    {
        return $this->execute('JJSoft\SigesCore\FieldGenerator\CreateFieldCommand',
            'JJSoft\SigesCore\FieldGenerator\Handler\CreateFieldCommandHandler', $data, [
                'JJSoft\SigesCore\FieldGenerator\Middleware\FieldGeneratorValidator',
    Severity: Minor
    Found in src/Traits/EntityManager.php and 1 other location - About 55 mins to fix
    src/Traits/EntityManager.php on lines 52..63

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        public function editField(array $data = [])
    {
        return $this->execute('JJSoft\SigesCore\FieldGenerator\EditFieldCommand',
            'JJSoft\SigesCore\FieldGenerator\Handler\EditFieldCommandHandler', $data, [
                'JJSoft\SigesCore\FieldGenerator\Middleware\EditFieldTypeValidator',
    Severity: Minor
    Found in src/Traits/EntityManager.php and 1 other location - About 55 mins to fix
    src/Traits/EntityManager.php on lines 34..45

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Method __construct has 7 arguments (exceeds 4 allowed). Consider refactoring.
    Open

        public function __construct($namespace = "", $name = "", $description = "", $slug = "", $prefix = "", $locked = true, $create_table = true)
    Severity: Major
    Found in src/EntityGenerator/EntityGeneratorCommand.php - About 50 mins to fix

      The property $create_table is not named in camelCase.
      Open

      class EntityGeneratorCommand
{
    /**
     * The entity namespace
     * @string
      Severity: Minor
      Found in src/EntityGenerator/EntityGeneratorCommand.php by phpmd

      CamelCasePropertyName

      Since: 0.2

      It is considered best practice to use the camelCase notation to name attributes.

      Example

      class ClassName {
    protected $property_name;
}

      Source

      Severity
      Category
      Status
      Source
      Language