kiwitcms/Kiwi

View on GitHub

Showing 243 of 379 total issues

Function execution_trends has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
Open

def execution_trends(query=None):

    if query is None:
        query = {}

Severity: Minor
Found in tcms/telemetry/api.py - About 1 hr to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

@permissions_required("testplans.view_plantype")
@rpc_method(name="PlanType.filter")
def filter(query):  # pylint: disable=redefined-builtin
    """
    .. function:: RPC PlanType.filter(query)
Severity: Major
Found in tcms/rpc/api/plantype.py and 1 other location - About 1 hr to fix
tcms/rpc/api/priority.py on lines 9..23

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

@permissions_required("management.view_priority")
@rpc_method(name="Priority.filter")
def filter(query):  # pylint: disable=redefined-builtin
    """
    .. function:: RPC Priority.filter(query)
Severity: Major
Found in tcms/rpc/api/priority.py and 1 other location - About 1 hr to fix
tcms/rpc/api/plantype.py on lines 40..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function ajax has 47 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    ajax: function (data, callback, settings) {
      const params = {}

      if ($('#id_summary').val()) {
        params.summary__icontains = $('#id_summary').val()
Severity: Minor
Found in tcms/testcases/static/testcases/js/search.js - About 1 hr to fix

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        if form.is_valid():
            test_plan = form.save()
            result = model_to_dict(test_plan, exclude=["tag"])
    
            # b/c value is set in the DB directly and if None
    Severity: Major
    Found in tcms/rpc/api/testplan.py and 1 other location - About 1 hr to fix
    tcms/rpc/api/testplan.py on lines 69..76

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        if form.is_valid():
            test_plan = form.save()
            result = model_to_dict(test_plan, exclude=["tag"])
    
            # b/c value is set in the DB directly and if None
    Severity: Major
    Found in tcms/rpc/api/testplan.py and 1 other location - About 1 hr to fix
    tcms/rpc/api/testplan.py on lines 185..192

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Cyclomatic complexity is too high in function delete_user. (6)
    Open

    def delete_user(user):
        """
        Delete user across DB schemas.
        """
        if hasattr(user, "tenant_set"):
    Severity: Minor
    Found in tcms/utils/user.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in function mailto. (6)
    Open

    @override(settings.LANGUAGE_CODE)
    def mailto(  # pylint: disable=invalid-name
        template_name,
        subject,
        recipients=None,
    Severity: Minor
    Found in tcms/core/utils/mailto.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method post. (6)
    Open

        def post(self, request):
            if not self._is_request_data_valid(request):
                return HttpResponseRedirect(request.META.get("HTTP_REFERER", "/"))
    
            # Do the clone action
    Severity: Minor
    Found in tcms/testcases/views.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in function is_api_function. (6)
    Open

    def is_api_function(node):
        # API functions always have @rpc_method decorator
        if not node.decorators:
            return False
    
    
    Severity: Minor
    Found in kiwi_lint/utils.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in class FormFieldChecker. (6)
    Open

    class FormFieldChecker(checkers.BaseChecker):
        __implements__ = (interfaces.IAstroidChecker,)
    
        name = "form-field-label-checker"
    
    
    Severity: Minor
    Found in kiwi_lint/forms.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method visit_call. (6)
    Open

        def visit_call(self, node):
            if node.func.as_string().endswith("Field") and node.keywords:
                for keyword in node.keywords:
                    if keyword.arg == "label":
                        self.add_message("form-field-label-used", node=node)
    Severity: Minor
    Found in kiwi_lint/forms.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method property_matrix. (6)
    Open

        @staticmethod
        def property_matrix(properties, _type="full"):
            """
            Return a sequence of tuples representing the property matrix!
            """
    Severity: Minor
    Found in tcms/testruns/models.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method execute_commands. (6)
    Open

        def execute_commands(self, *args, **kwargs):
            """
            This is the actual implementation. Can be overriden by inherited classes.
            """
            output = None

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function displayProperties has 44 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

    function displayProperties (objectId, objectAttrName, viewMethod, removeMethod) {
      const container = $('#properties-accordion')
      const propertyTemplate = $('#property-fragment')[0].content
      const valueTemplate = $(propertyTemplate).find('template')[0].content
      const shownProperties = []
    Severity: Minor
    Found in tcms/static/js/properties.js - About 1 hr to fix

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          jsonRPC('TestCase.filter', query, function (filtered) {
            // hide again if a previous async request showed something else
            $('.js-testcase-row').hide()
            filtered.forEach(tc => $(`[data-testcase-pk=${tc.id}]`).show())
          })
      Severity: Major
      Found in tcms/testplans/static/testplans/js/get.js and 1 other location - About 1 hr to fix
      tcms/testruns/static/testruns/js/get.js on lines 243..247

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 70.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          jsonRPC('TestCase.filter', query, function (filtered) {
            // hide again if a previous async request showed something else
            $('.test-execution-element').hide()
            filtered.forEach(tc => $(`.test-execution-case-${tc.id}`).show())
          })
      Severity: Major
      Found in tcms/testruns/static/testruns/js/get.js and 1 other location - About 1 hr to fix
      tcms/testplans/static/testplans/js/get.js on lines 690..694

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 70.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Function loadBugs has 43 lines of code (exceeds 25 allowed). Consider refactoring.
      Open

      function loadBugs (selector, filter) {
        const noRecordsFoundText = $('.bugs-table').data('no-records-found-text')
      
        $(selector).DataTable({
          ajax: (data, callback, settings) => {
      Severity: Minor
      Found in tcms/static/js/bugs.js - About 1 hr to fix

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

          d3.select('.automated-bar')
            .attr('aria-valuenow', `${automatedPercent}`)
            .attr('title', `${count.automated} Automated`)
            .style('width', `${automatedPercent}%`)
        Severity: Major
        Found in tcms/telemetry/static/telemetry/js/testing/breakdown.js and 1 other location - About 1 hr to fix
        tcms/telemetry/static/telemetry/js/testing/breakdown.js on lines 77..80

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 69.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

          d3.select('.manual-bar')
            .attr('aria-valuenow', `${manualPercent}`)
            .attr('title', `${count.manual} Manual`)
            .style('width', `${manualPercent}%`)
        Severity: Major
        Found in tcms/telemetry/static/telemetry/js/testing/breakdown.js and 1 other location - About 1 hr to fix
        tcms/telemetry/static/telemetry/js/testing/breakdown.js on lines 70..73

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 69.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Severity
        Category
        Status
        Source
        Language