Showing 388 of 388 total issues
Expected method shorthand. Open
minChunks: function (module, count) {
- Read upRead up
- Exclude checks
Require Object Literal Shorthand Syntax (object-shorthand)
EcmaScript 6 provides a concise form for defining object literal methods and properties. This syntax can make defining complex object literals much cleaner.
Here are a few common examples using the ES5 syntax:
// properties
var foo = {
x: x,
y: y,
z: z,
};
// methods
var foo = {
a: function() {},
b: function() {}
};
Now here are ES6 equivalents:
/*eslint-env es6*/
// properties
var foo = {x, y, z};
// methods
var foo = {
a() {},
b() {}
};
Rule Details
This rule enforces the use of the shorthand syntax. This applies to all methods (including generators) defined in object literals and any properties defined where the key name matches name of the assigned variable.
Each of the following properties would warn:
/*eslint object-shorthand: "error"*/
/*eslint-env es6*/
var foo = {
w: function() {},
x: function *() {},
[y]: function() {},
z: z
};
In that case the expected syntax would have been:
/*eslint object-shorthand: "error"*/
/*eslint-env es6*/
var foo = {
w() {},
*x() {},
[y]() {},
z
};
This rule does not flag arrow functions inside of object literals. The following will not warn:
/*eslint object-shorthand: "error"*/
/*eslint-env es6*/
var foo = {
x: (y) => y
};
Options
The rule takes an option which specifies when it should be applied. It can be set to one of the following values:
-
"always"
(default) expects that the shorthand will be used whenever possible. -
"methods"
ensures the method shorthand is used (also applies to generators). -
"properties"
ensures the property shorthand is used (where the key and variable name match). -
"never"
ensures that no property or method shorthand is used in any object literal. -
"consistent"
ensures that either all shorthand or all longform will be used in an object literal. -
"consistent-as-needed"
ensures that either all shorthand or all longform will be used in an object literal, but ensures all shorthand whenever possible.
You can set the option in configuration like this:
{
"object-shorthand": ["error", "always"]
}
Additionally, the rule takes an optional object configuration:
-
"avoidQuotes": true
indicates that longform syntax is preferred whenever the object key is a string literal (default:false
). Note that this option can only be enabled when the string option is set to"always"
,"methods"
, or"properties"
. -
"ignoreConstructors": true
can be used to prevent the rule from reporting errors for constructor functions. (By default, the rule treats constructors the same way as other functions.) Note that this option can only be enabled when the string option is set to"always"
or"methods"
. -
"avoidExplicitReturnArrows": true
indicates that methods are preferred over explicit-return arrow functions for function properties. (By default, the rule allows either of these.) Note that this option can only be enabled when the string option is set to"always"
or"methods"
.
avoidQuotes
{
"object-shorthand": ["error", "always", { "avoidQuotes": true }]
}
Example of incorrect code for this rule with the "always", { "avoidQuotes": true }
option:
/*eslint object-shorthand: ["error", "always", { "avoidQuotes": true }]*/
/*eslint-env es6*/
var foo = {
"bar-baz"() {}
};
Example of correct code for this rule with the "always", { "avoidQuotes": true }
option:
/*eslint object-shorthand: ["error", "always", { "avoidQuotes": true }]*/
/*eslint-env es6*/
var foo = {
"bar-baz": function() {},
"qux": qux
};
ignoreConstructors
{
"object-shorthand": ["error", "always", { "ignoreConstructors": true }]
}
Example of correct code for this rule with the "always", { "ignoreConstructors": true }
option:
/*eslint object-shorthand: ["error", "always", { "ignoreConstructors": true }]*/
/*eslint-env es6*/
var foo = {
ConstructorFunction: function() {}
};
avoidExplicitReturnArrows
{
"object-shorthand": ["error", "always", { "avoidExplicitReturnArrows": true }]
}
Example of incorrect code for this rule with the "always", { "avoidExplicitReturnArrows": true }
option:
/*eslint object-shorthand: ["error", "always", { "avoidExplicitReturnArrows": true }]*/
/*eslint-env es6*/
var foo = {
foo: (bar, baz) => {
return bar + baz;
},
qux: (foobar) => {
return foobar * 2;
}
};
Example of correct code for this rule with the "always", { "avoidExplicitReturnArrows": true }
option:
/*eslint object-shorthand: ["error", "always", { "avoidExplicitReturnArrows": true }]*/
/*eslint-env es6*/
var foo = {
foo(bar, baz) {
return bar + baz;
},
qux: foobar => foobar * 2
};
Example of incorrect code for this rule with the "consistent"
option:
/*eslint object-shorthand: [2, "consistent"]*/
/*eslint-env es6*/
var foo = {
a,
b: "foo",
};
Examples of correct code for this rule with the "consistent"
option:
/*eslint object-shorthand: [2, "consistent"]*/
/*eslint-env es6*/
var foo = {
a: a,
b: "foo"
};
var bar = {
a,
b,
};
Example of incorrect code with the "consistent-as-needed"
option, which is very similar to "consistent"
:
/*eslint object-shorthand: [2, "consistent-as-needed"]*/
/*eslint-env es6*/
var foo = {
a: a,
b: b,
};
When Not To Use It
Anyone not yet in an ES6 environment would not want to apply this rule. Others may find the terseness of the shorthand syntax harder to read and may not want to encourage it with this rule.
Further Reading
Object initializer - MDN Source: http://eslint.org/docs/rules/
Missing trailing comma. Open
removeAttributeQuotes: true
- Read upRead up
- Exclude checks
require or disallow trailing commas (comma-dangle)
Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.
var foo = {
bar: "baz",
qux: "quux",
};
Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:
Less clear:
var foo = {
- bar: "baz",
- qux: "quux"
+ bar: "baz"
};
More clear:
var foo = {
bar: "baz",
- qux: "quux",
};
Rule Details
This rule enforces consistent use of trailing commas in object and array literals.
Options
This rule has a string option or an object option:
{
"comma-dangle": ["error", "never"],
// or
"comma-dangle": ["error", {
"arrays": "never",
"objects": "never",
"imports": "never",
"exports": "never",
"functions": "ignore",
}]
}
-
"never"
(default) disallows trailing commas -
"always"
requires trailing commas -
"always-multiline"
requires trailing commas when the last element or property is in a different line than the closing]
or}
and disallows trailing commas when the last element or property is on the same line as the closing]
or}
-
"only-multiline"
allows (but does not require) trailing commas when the last element or property is in a different line than the closing]
or}
and disallows trailing commas when the last element or property is on the same line as the closing]
or}
Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.
You can also use an object option to configure this rule for each type of syntax.
Each of the following options can be set to "never"
, "always"
, "always-multiline"
, "only-multiline"
, or "ignore"
.
The default for each option is "never"
unless otherwise specified.
-
arrays
is for array literals and array patterns of destructuring. (e.g.let [a,] = [1,];
) -
objects
is for object literals and object patterns of destructuring. (e.g.let {a,} = {a: 1};
) -
imports
is for import declarations of ES Modules. (e.g.import {a,} from "foo";
) -
exports
is for export declarations of ES Modules. (e.g.export {a,};
) -
functions
is for function declarations and function calls. (e.g.(function(a,){ })(b,);
)
functions
is set to"ignore"
by default for consistency with the string option.
never
Examples of incorrect code for this rule with the default "never"
option:
/*eslint comma-dangle: ["error", "never"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var arr = [1,2,];
foo({
bar: "baz",
qux: "quux",
});
Examples of correct code for this rule with the default "never"
option:
/*eslint comma-dangle: ["error", "never"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var arr = [1,2];
foo({
bar: "baz",
qux: "quux"
});
always
Examples of incorrect code for this rule with the "always"
option:
/*eslint comma-dangle: ["error", "always"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var arr = [1,2];
foo({
bar: "baz",
qux: "quux"
});
Examples of correct code for this rule with the "always"
option:
/*eslint comma-dangle: ["error", "always"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var arr = [1,2,];
foo({
bar: "baz",
qux: "quux",
});
always-multiline
Examples of incorrect code for this rule with the "always-multiline"
option:
/*eslint comma-dangle: ["error", "always-multiline"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var foo = { bar: "baz", qux: "quux", };
var arr = [1,2,];
var arr = [1,
2,];
var arr = [
1,
2
];
foo({
bar: "baz",
qux: "quux"
});
Examples of correct code for this rule with the "always-multiline"
option:
/*eslint comma-dangle: ["error", "always-multiline"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];
var arr = [1,
2];
var arr = [
1,
2,
];
foo({
bar: "baz",
qux: "quux",
});
only-multiline
Examples of incorrect code for this rule with the "only-multiline"
option:
/*eslint comma-dangle: ["error", "only-multiline"]*/
var foo = { bar: "baz", qux: "quux", };
var arr = [1,2,];
var arr = [1,
2,];
Examples of correct code for this rule with the "only-multiline"
option:
/*eslint comma-dangle: ["error", "only-multiline"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var foo = {
bar: "baz",
qux: "quux"
};
var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];
var arr = [1,
2];
var arr = [
1,
2,
];
var arr = [
1,
2
];
foo({
bar: "baz",
qux: "quux",
});
foo({
bar: "baz",
qux: "quux"
});
functions
Examples of incorrect code for this rule with the {"functions": "never"}
option:
/*eslint comma-dangle: ["error", {"functions": "never"}]*/
function foo(a, b,) {
}
foo(a, b,);
new foo(a, b,);
Examples of correct code for this rule with the {"functions": "never"}
option:
/*eslint comma-dangle: ["error", {"functions": "never"}]*/
function foo(a, b) {
}
foo(a, b);
new foo(a, b);
Examples of incorrect code for this rule with the {"functions": "always"}
option:
/*eslint comma-dangle: ["error", {"functions": "always"}]*/
function foo(a, b) {
}
foo(a, b);
new foo(a, b);
Examples of correct code for this rule with the {"functions": "always"}
option:
/*eslint comma-dangle: ["error", {"functions": "always"}]*/
function foo(a, b,) {
}
foo(a, b,);
new foo(a, b,);
When Not To Use It
You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/
Missing trailing comma. Open
chunksSortMode: 'dependency'
- Read upRead up
- Exclude checks
require or disallow trailing commas (comma-dangle)
Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.
var foo = {
bar: "baz",
qux: "quux",
};
Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:
Less clear:
var foo = {
- bar: "baz",
- qux: "quux"
+ bar: "baz"
};
More clear:
var foo = {
bar: "baz",
- qux: "quux",
};
Rule Details
This rule enforces consistent use of trailing commas in object and array literals.
Options
This rule has a string option or an object option:
{
"comma-dangle": ["error", "never"],
// or
"comma-dangle": ["error", {
"arrays": "never",
"objects": "never",
"imports": "never",
"exports": "never",
"functions": "ignore",
}]
}
-
"never"
(default) disallows trailing commas -
"always"
requires trailing commas -
"always-multiline"
requires trailing commas when the last element or property is in a different line than the closing]
or}
and disallows trailing commas when the last element or property is on the same line as the closing]
or}
-
"only-multiline"
allows (but does not require) trailing commas when the last element or property is in a different line than the closing]
or}
and disallows trailing commas when the last element or property is on the same line as the closing]
or}
Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.
You can also use an object option to configure this rule for each type of syntax.
Each of the following options can be set to "never"
, "always"
, "always-multiline"
, "only-multiline"
, or "ignore"
.
The default for each option is "never"
unless otherwise specified.
-
arrays
is for array literals and array patterns of destructuring. (e.g.let [a,] = [1,];
) -
objects
is for object literals and object patterns of destructuring. (e.g.let {a,} = {a: 1};
) -
imports
is for import declarations of ES Modules. (e.g.import {a,} from "foo";
) -
exports
is for export declarations of ES Modules. (e.g.export {a,};
) -
functions
is for function declarations and function calls. (e.g.(function(a,){ })(b,);
)
functions
is set to"ignore"
by default for consistency with the string option.
never
Examples of incorrect code for this rule with the default "never"
option:
/*eslint comma-dangle: ["error", "never"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var arr = [1,2,];
foo({
bar: "baz",
qux: "quux",
});
Examples of correct code for this rule with the default "never"
option:
/*eslint comma-dangle: ["error", "never"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var arr = [1,2];
foo({
bar: "baz",
qux: "quux"
});
always
Examples of incorrect code for this rule with the "always"
option:
/*eslint comma-dangle: ["error", "always"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var arr = [1,2];
foo({
bar: "baz",
qux: "quux"
});
Examples of correct code for this rule with the "always"
option:
/*eslint comma-dangle: ["error", "always"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var arr = [1,2,];
foo({
bar: "baz",
qux: "quux",
});
always-multiline
Examples of incorrect code for this rule with the "always-multiline"
option:
/*eslint comma-dangle: ["error", "always-multiline"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var foo = { bar: "baz", qux: "quux", };
var arr = [1,2,];
var arr = [1,
2,];
var arr = [
1,
2
];
foo({
bar: "baz",
qux: "quux"
});
Examples of correct code for this rule with the "always-multiline"
option:
/*eslint comma-dangle: ["error", "always-multiline"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];
var arr = [1,
2];
var arr = [
1,
2,
];
foo({
bar: "baz",
qux: "quux",
});
only-multiline
Examples of incorrect code for this rule with the "only-multiline"
option:
/*eslint comma-dangle: ["error", "only-multiline"]*/
var foo = { bar: "baz", qux: "quux", };
var arr = [1,2,];
var arr = [1,
2,];
Examples of correct code for this rule with the "only-multiline"
option:
/*eslint comma-dangle: ["error", "only-multiline"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var foo = {
bar: "baz",
qux: "quux"
};
var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];
var arr = [1,
2];
var arr = [
1,
2,
];
var arr = [
1,
2
];
foo({
bar: "baz",
qux: "quux",
});
foo({
bar: "baz",
qux: "quux"
});
functions
Examples of incorrect code for this rule with the {"functions": "never"}
option:
/*eslint comma-dangle: ["error", {"functions": "never"}]*/
function foo(a, b,) {
}
foo(a, b,);
new foo(a, b,);
Examples of correct code for this rule with the {"functions": "never"}
option:
/*eslint comma-dangle: ["error", {"functions": "never"}]*/
function foo(a, b) {
}
foo(a, b);
new foo(a, b);
Examples of incorrect code for this rule with the {"functions": "always"}
option:
/*eslint comma-dangle: ["error", {"functions": "always"}]*/
function foo(a, b) {
}
foo(a, b);
new foo(a, b);
Examples of correct code for this rule with the {"functions": "always"}
option:
/*eslint comma-dangle: ["error", {"functions": "always"}]*/
function foo(a, b,) {
}
foo(a, b,);
new foo(a, b,);
When Not To Use It
You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/
Missing trailing comma. Open
path.join(__dirname, '../node_modules')
- Read upRead up
- Exclude checks
require or disallow trailing commas (comma-dangle)
Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.
var foo = {
bar: "baz",
qux: "quux",
};
Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:
Less clear:
var foo = {
- bar: "baz",
- qux: "quux"
+ bar: "baz"
};
More clear:
var foo = {
bar: "baz",
- qux: "quux",
};
Rule Details
This rule enforces consistent use of trailing commas in object and array literals.
Options
This rule has a string option or an object option:
{
"comma-dangle": ["error", "never"],
// or
"comma-dangle": ["error", {
"arrays": "never",
"objects": "never",
"imports": "never",
"exports": "never",
"functions": "ignore",
}]
}
-
"never"
(default) disallows trailing commas -
"always"
requires trailing commas -
"always-multiline"
requires trailing commas when the last element or property is in a different line than the closing]
or}
and disallows trailing commas when the last element or property is on the same line as the closing]
or}
-
"only-multiline"
allows (but does not require) trailing commas when the last element or property is in a different line than the closing]
or}
and disallows trailing commas when the last element or property is on the same line as the closing]
or}
Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.
You can also use an object option to configure this rule for each type of syntax.
Each of the following options can be set to "never"
, "always"
, "always-multiline"
, "only-multiline"
, or "ignore"
.
The default for each option is "never"
unless otherwise specified.
-
arrays
is for array literals and array patterns of destructuring. (e.g.let [a,] = [1,];
) -
objects
is for object literals and object patterns of destructuring. (e.g.let {a,} = {a: 1};
) -
imports
is for import declarations of ES Modules. (e.g.import {a,} from "foo";
) -
exports
is for export declarations of ES Modules. (e.g.export {a,};
) -
functions
is for function declarations and function calls. (e.g.(function(a,){ })(b,);
)
functions
is set to"ignore"
by default for consistency with the string option.
never
Examples of incorrect code for this rule with the default "never"
option:
/*eslint comma-dangle: ["error", "never"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var arr = [1,2,];
foo({
bar: "baz",
qux: "quux",
});
Examples of correct code for this rule with the default "never"
option:
/*eslint comma-dangle: ["error", "never"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var arr = [1,2];
foo({
bar: "baz",
qux: "quux"
});
always
Examples of incorrect code for this rule with the "always"
option:
/*eslint comma-dangle: ["error", "always"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var arr = [1,2];
foo({
bar: "baz",
qux: "quux"
});
Examples of correct code for this rule with the "always"
option:
/*eslint comma-dangle: ["error", "always"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var arr = [1,2,];
foo({
bar: "baz",
qux: "quux",
});
always-multiline
Examples of incorrect code for this rule with the "always-multiline"
option:
/*eslint comma-dangle: ["error", "always-multiline"]*/
var foo = {
bar: "baz",
qux: "quux"
};
var foo = { bar: "baz", qux: "quux", };
var arr = [1,2,];
var arr = [1,
2,];
var arr = [
1,
2
];
foo({
bar: "baz",
qux: "quux"
});
Examples of correct code for this rule with the "always-multiline"
option:
/*eslint comma-dangle: ["error", "always-multiline"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];
var arr = [1,
2];
var arr = [
1,
2,
];
foo({
bar: "baz",
qux: "quux",
});
only-multiline
Examples of incorrect code for this rule with the "only-multiline"
option:
/*eslint comma-dangle: ["error", "only-multiline"]*/
var foo = { bar: "baz", qux: "quux", };
var arr = [1,2,];
var arr = [1,
2,];
Examples of correct code for this rule with the "only-multiline"
option:
/*eslint comma-dangle: ["error", "only-multiline"]*/
var foo = {
bar: "baz",
qux: "quux",
};
var foo = {
bar: "baz",
qux: "quux"
};
var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];
var arr = [1,
2];
var arr = [
1,
2,
];
var arr = [
1,
2
];
foo({
bar: "baz",
qux: "quux",
});
foo({
bar: "baz",
qux: "quux"
});
functions
Examples of incorrect code for this rule with the {"functions": "never"}
option:
/*eslint comma-dangle: ["error", {"functions": "never"}]*/
function foo(a, b,) {
}
foo(a, b,);
new foo(a, b,);
Examples of correct code for this rule with the {"functions": "never"}
option:
/*eslint comma-dangle: ["error", {"functions": "never"}]*/
function foo(a, b) {
}
foo(a, b);
new foo(a, b);
Examples of incorrect code for this rule with the {"functions": "always"}
option:
/*eslint comma-dangle: ["error", {"functions": "always"}]*/
function foo(a, b) {
}
foo(a, b);
new foo(a, b);
Examples of correct code for this rule with the {"functions": "always"}
option:
/*eslint comma-dangle: ["error", {"functions": "always"}]*/
function foo(a, b,) {
}
foo(a, b,);
new foo(a, b,);
When Not To Use It
You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/
Missing semicolon. Open
)
- Read upRead up
- Exclude checks
require or disallow semicolons instead of ASI (semi)
JavaScript is unique amongst the C-like languages in that it doesn't require semicolons at the end of each statement. In many cases, the JavaScript engine can determine that a semicolon should be in a certain spot and will automatically add it. This feature is known as automatic semicolon insertion (ASI) and is considered one of the more controversial features of JavaScript. For example, the following lines are both valid:
var name = "ESLint"
var website = "eslint.org";
On the first line, the JavaScript engine will automatically insert a semicolon, so this is not considered a syntax error. The JavaScript engine still knows how to interpret the line and knows that the line end indicates the end of the statement.
In the debate over ASI, there are generally two schools of thought. The first is that we should treat ASI as if it didn't exist and always include semicolons manually. The rationale is that it's easier to always include semicolons than to try to remember when they are or are not required, and thus decreases the possibility of introducing an error.
However, the ASI mechanism can sometimes be tricky to people who are using semicolons. For example, consider this code:
return
{
name: "ESLint"
};
This may look like a return
statement that returns an object literal, however, the JavaScript engine will interpret this code as:
return;
{
name: "ESLint";
}
Effectively, a semicolon is inserted after the return
statement, causing the code below it (a labeled literal inside a block) to be unreachable. This rule and the [no-unreachable](no-unreachable.md) rule will protect your code from such cases.
On the other side of the argument are those who says that since semicolons are inserted automatically, they are optional and do not need to be inserted manually. However, the ASI mechanism can also be tricky to people who don't use semicolons. For example, consider this code:
var globalCounter = { }
(function () {
var n = 0
globalCounter.increment = function () {
return ++n
}
})()
In this example, a semicolon will not be inserted after the first line, causing a run-time error (because an empty object is called as if it's a function). The [no-unexpected-multiline](no-unexpected-multiline.md) rule can protect your code from such cases.
Although ASI allows for more freedom over your coding style, it can also make your code behave in an unexpected way, whether you use semicolons or not. Therefore, it is best to know when ASI takes place and when it does not, and have ESLint protect your code from these potentially unexpected cases. In short, as once described by Isaac Schlueter, a \n
character always ends a statement (just like a semicolon) unless one of the following is true:
- The statement has an unclosed paren, array literal, or object literal or ends in some other way that is not a valid way to end a statement. (For instance, ending with
.
or,
.) - The line is
--
or++
(in which case it will decrement/increment the next token.) - It is a
for()
,while()
,do
,if()
, orelse
, and there is no{
- The next line starts with
[
,(
,+
,*
,/
,-
,,
,.
, or some other binary operator that can only be found between two tokens in a single expression.
Rule Details
This rule enforces consistent use of semicolons.
Options
This rule has two options, a string option and an object option.
String option:
-
"always"
(default) requires semicolons at the end of statements -
"never"
disallows semicolons as the end of statements (except to disambiguate statements beginning with[
,(
,/
,+
, or-
)
Object option:
-
"omitLastInOneLineBlock": true
ignores the last semicolon in a block in which its braces (and therefore the content of the block) are in the same line
always
Examples of incorrect code for this rule with the default "always"
option:
/*eslint semi: ["error", "always"]*/
var name = "ESLint"
object.method = function() {
// ...
}
Examples of correct code for this rule with the default "always"
option:
/*eslint semi: "error"*/
var name = "ESLint";
object.method = function() {
// ...
};
never
Examples of incorrect code for this rule with the "never"
option:
/*eslint semi: ["error", "never"]*/
var name = "ESLint";
object.method = function() {
// ...
};
Examples of correct code for this rule with the "never"
option:
/*eslint semi: ["error", "never"]*/
var name = "ESLint"
object.method = function() {
// ...
}
var name = "ESLint"
;(function() {
// ...
})()
omitLastInOneLineBlock
Examples of additional correct code for this rule with the "always", { "omitLastInOneLineBlock": true }
options:
/*eslint semi: ["error", "always", { "omitLastInOneLineBlock": true}] */
if (foo) { bar() }
if (foo) { bar(); baz() }
When Not To Use It
If you do not want to enforce semicolon usage (or omission) in any particular way, then you can turn this rule off.
Further Reading
Related Rules
- [no-extra-semi](no-extra-semi.md)
- [no-unexpected-multiline](no-unexpected-multiline.md)
- [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/
Missing semicolon. Open
var prodEnv = require('./prod.env')
- Read upRead up
- Exclude checks
require or disallow semicolons instead of ASI (semi)
JavaScript is unique amongst the C-like languages in that it doesn't require semicolons at the end of each statement. In many cases, the JavaScript engine can determine that a semicolon should be in a certain spot and will automatically add it. This feature is known as automatic semicolon insertion (ASI) and is considered one of the more controversial features of JavaScript. For example, the following lines are both valid:
var name = "ESLint"
var website = "eslint.org";
On the first line, the JavaScript engine will automatically insert a semicolon, so this is not considered a syntax error. The JavaScript engine still knows how to interpret the line and knows that the line end indicates the end of the statement.
In the debate over ASI, there are generally two schools of thought. The first is that we should treat ASI as if it didn't exist and always include semicolons manually. The rationale is that it's easier to always include semicolons than to try to remember when they are or are not required, and thus decreases the possibility of introducing an error.
However, the ASI mechanism can sometimes be tricky to people who are using semicolons. For example, consider this code:
return
{
name: "ESLint"
};
This may look like a return
statement that returns an object literal, however, the JavaScript engine will interpret this code as:
return;
{
name: "ESLint";
}
Effectively, a semicolon is inserted after the return
statement, causing the code below it (a labeled literal inside a block) to be unreachable. This rule and the [no-unreachable](no-unreachable.md) rule will protect your code from such cases.
On the other side of the argument are those who says that since semicolons are inserted automatically, they are optional and do not need to be inserted manually. However, the ASI mechanism can also be tricky to people who don't use semicolons. For example, consider this code:
var globalCounter = { }
(function () {
var n = 0
globalCounter.increment = function () {
return ++n
}
})()
In this example, a semicolon will not be inserted after the first line, causing a run-time error (because an empty object is called as if it's a function). The [no-unexpected-multiline](no-unexpected-multiline.md) rule can protect your code from such cases.
Although ASI allows for more freedom over your coding style, it can also make your code behave in an unexpected way, whether you use semicolons or not. Therefore, it is best to know when ASI takes place and when it does not, and have ESLint protect your code from these potentially unexpected cases. In short, as once described by Isaac Schlueter, a \n
character always ends a statement (just like a semicolon) unless one of the following is true:
- The statement has an unclosed paren, array literal, or object literal or ends in some other way that is not a valid way to end a statement. (For instance, ending with
.
or,
.) - The line is
--
or++
(in which case it will decrement/increment the next token.) - It is a
for()
,while()
,do
,if()
, orelse
, and there is no{
- The next line starts with
[
,(
,+
,*
,/
,-
,,
,.
, or some other binary operator that can only be found between two tokens in a single expression.
Rule Details
This rule enforces consistent use of semicolons.
Options
This rule has two options, a string option and an object option.
String option:
-
"always"
(default) requires semicolons at the end of statements -
"never"
disallows semicolons as the end of statements (except to disambiguate statements beginning with[
,(
,/
,+
, or-
)
Object option:
-
"omitLastInOneLineBlock": true
ignores the last semicolon in a block in which its braces (and therefore the content of the block) are in the same line
always
Examples of incorrect code for this rule with the default "always"
option:
/*eslint semi: ["error", "always"]*/
var name = "ESLint"
object.method = function() {
// ...
}
Examples of correct code for this rule with the default "always"
option:
/*eslint semi: "error"*/
var name = "ESLint";
object.method = function() {
// ...
};
never
Examples of incorrect code for this rule with the "never"
option:
/*eslint semi: ["error", "never"]*/
var name = "ESLint";
object.method = function() {
// ...
};
Examples of correct code for this rule with the "never"
option:
/*eslint semi: ["error", "never"]*/
var name = "ESLint"
object.method = function() {
// ...
}
var name = "ESLint"
;(function() {
// ...
})()
omitLastInOneLineBlock
Examples of additional correct code for this rule with the "always", { "omitLastInOneLineBlock": true }
options:
/*eslint semi: ["error", "always", { "omitLastInOneLineBlock": true}] */
if (foo) { bar() }
if (foo) { bar(); baz() }
When Not To Use It
If you do not want to enforce semicolon usage (or omission) in any particular way, then you can turn this rule off.
Further Reading
Related Rules
- [no-extra-semi](no-extra-semi.md)
- [no-unexpected-multiline](no-unexpected-multiline.md)
- [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/
Unexpected var, use let or const instead. Open
var merge = require('webpack-merge')
- Read upRead up
- Exclude checks
require let
or const
instead of var
(no-var)
ECMAScript 6 allows programmers to create variables with block scope instead of function scope using the let
and const
keywords. Block scope is common in many other programming languages and helps programmers avoid mistakes
such as:
var count = people.length;
var enoughFood = count > sandwiches.length;
if (enoughFood) {
var count = sandwiches.length; // accidentally overriding the count variable
console.log("We have " + count + " sandwiches for everyone. Plenty for all!");
}
// our count variable is no longer accurate
console.log("We have " + count + " people and " + sandwiches.length + " sandwiches!");
Rule Details
This rule is aimed at discouraging the use of var
and encouraging the use of const
or let
instead.
Examples
Examples of incorrect code for this rule:
/*eslint no-var: "error"*/
var x = "y";
var CONFIG = {};
Examples of correct code for this rule:
/*eslint no-var: "error"*/
/*eslint-env es6*/
let x = "y";
const CONFIG = {};
When Not To Use It
In addition to non-ES6 environments, existing JavaScript projects that are beginning to introduce ES6 into their
codebase may not want to apply this rule if the cost of migrating from var
to let
is too costly.
Source: http://eslint.org/docs/rules/
Unexpected var, use let or const instead. Open
var devEnv = require('./dev.env')
- Read upRead up
- Exclude checks
require let
or const
instead of var
(no-var)
ECMAScript 6 allows programmers to create variables with block scope instead of function scope using the let
and const
keywords. Block scope is common in many other programming languages and helps programmers avoid mistakes
such as:
var count = people.length;
var enoughFood = count > sandwiches.length;
if (enoughFood) {
var count = sandwiches.length; // accidentally overriding the count variable
console.log("We have " + count + " sandwiches for everyone. Plenty for all!");
}
// our count variable is no longer accurate
console.log("We have " + count + " people and " + sandwiches.length + " sandwiches!");
Rule Details
This rule is aimed at discouraging the use of var
and encouraging the use of const
or let
instead.
Examples
Examples of incorrect code for this rule:
/*eslint no-var: "error"*/
var x = "y";
var CONFIG = {};
Examples of correct code for this rule:
/*eslint no-var: "error"*/
/*eslint-env es6*/
let x = "y";
const CONFIG = {};
When Not To Use It
In addition to non-ES6 environments, existing JavaScript projects that are beginning to introduce ES6 into their
codebase may not want to apply this rule if the cost of migrating from var
to let
is too costly.
Source: http://eslint.org/docs/rules/