README.md
# Ruby Units
[](https://codeclimate.com/github/olbrich/ruby-units/maintainability)
[](https://codeclimate.com/github/olbrich/ruby-units/test_coverage)
[](https://app.fossa.io/projects/git%2Bgithub.com%2Folbrich%2Fruby-units?ref=badge_shield)
Kevin C. Olbrich, Ph.D.
Project page:
[http://github.com/olbrich/ruby-units](http://github.com/olbrich/ruby-units)
## Introduction
Many technical applications make use of specialized calculations at some point.
Frequently, these calculations require unit conversions to ensure accurate
results. Needless to say, this is a pain to properly keep track of, and is prone
to numerous errors.
## Solution
The 'Ruby units' gem is designed to simplify the handling of units for
scientific calculations. The units of each quantity are specified when a Unit
object is created and the Unit class will handle all subsequent conversions and
manipulations to ensure an accurate result.
## Installation
This package may be installed using:
```bash
gem install ruby-units
```
or add this to your `Gemfile`
```ruby
gem 'ruby-units'
```
## Usage
```ruby
unit = Unit.new("1") # constant only
unit = Unit.new("mm") # unit only (defaults to a scalar of 1)
unit = Unit.new("1 mm") # create a simple unit
unit = Unit.new("1 mm/s") # a compound unit
unit = Unit.new("1 mm s^-1") # in exponent notation
unit = Unit.new("1 kg*m^2/s^2") # complex unit
unit = Unit.new("1 kg m^2 s^-2") # complex unit
unit = Unit.new("1 mm") # shorthand
unit = "1 mm".to_unit # convert string object
unit = object.to_unit # convert any object using object.to_s
unit = Unit.new('1/4 cup') # Rational number
unit = Unit.new('1+1i mm') # Complex Number
```
### Rules
1. only 1 quantity per unit (with 2 exceptions... 6'5" and '8 lbs 8 oz')
2. use SI notation when possible
3. spaces in units are allowed, but ones like '11/m' will be recognized as '11
1/m'.
### Unit compatibility
Many methods require that the units of two operands are compatible. Compatible
units are those that can be easily converted into each other, such as 'meters'
and 'feet'.
```ruby
unit1 =~ unit2 #=> true if units are compatible
unit1.compatible?(unit2) #=> true if units are compatible
```
### Unit Math
```text
Unit#+() # Add. only works if units are compatible
Unit#-() # Subtract. only works if units are compatible
Unit#*() # Multiply.
Unit#/() # Divide.
Unit#**() # Exponentiate. Exponent must be an integer, can be positive, negative, or zero
Unit#inverse # Returns 1/unit
Unit#abs # Returns absolute value of the unit quantity. Strips off the units
Unit#ceil # rounds quantity to next highest integer
Unit#floor # rounds quantity down to next lower integer
Unit#round # rounds quantity to nearest integer
Unit#to_int # returns the quantity as an integer
```
Unit will coerce other objects into a Unit if used in a formula. This means...
```ruby
Unit.new("1 mm") + "2 mm" == Unit.new("3 mm")
```
This will work as expected so long as you start the formula with a `Unit`
object.
### Conversions & Comparisons
Units can be converted to other units in a couple of ways.
```ruby
unit.convert_to('ft') # convert
unit1 = unit >> "ft" # convert to 'feet'
unit >>= "ft" # convert and overwrite original object
unit3 = unit1 + unit2 # resulting object will have the units of unit1
unit3 = unit1 - unit2 # resulting object will have the units of unit1
unit1 <=> unit2 # does comparison on quantities in base units, throws an exception if not compatible
unit1 === unit2 # true if units and quantity are the same, even if 'equivalent' by <=>
unit1 + unit2 >> "ft" # converts result of math to 'ft'
(unit1 + unit2).convert_to('ft') # converts result to 'ft'
```
Any object that defines a `to_unit` method will be automatically coerced to a
unit during calculations.
### Text Output
Units will display themselves nicely based on the display_name for the units and
prefixes. Since `Unit` implements a `Unit#to_s`, all that is needed in most
cases is:
```ruby
"#{Unit.new('1 mm')}" #=> "1 mm"
```
The `to_s` also accepts some options.
```ruby
Unit.new('1.5 mm').to_s("%0.2f") # "1.50 mm". Enter any valid format
# string. Also accepts strftime format
Unit.new('10 mm').to_s("%0.2f in")# "0.39 in". can also format and convert in
# the same time.
Unit.new('1.5 mm').to_s("in") # converts to inches before printing
Unit.new("2 m").to_s(:ft) # returns 6'7"
Unit.new("100 kg").to_s(:lbs) # returns 220 lbs, 7 oz
Unit.new("100 kg").to_s(:stone) # returns 15 stone, 10 lb
```
### Time Helpers
`Time`, `Date`, and `DateTime` objects can have time units added or subtracted.
```ruby
Time.now + Unit.new("10 min")
```
Several helpers have also been defined. Note: If you include the 'Chronic' gem,
you can specify times in natural language.
```ruby
Unit.new('min').since(DateTime.parse('9/18/06 3:00pm'))
```
Durations may be entered as 'HH:MM:SS, usec' and will be returned in 'hours'.
```ruby
Unit.new('1:00') #=> 1 h
Unit.new('0:30') #=> 0.5 h
Unit.new('0:30:30') #=> 0.5 h + 30 sec
```
If only one ":" is present, it is interpreted as the separator between hours and
minutes.
### Ranges
```ruby
[Unit.new('0 h')..Unit.new('10 h')].each {|x| p x}
```
works so long as the starting point has an integer scalar
### Math functions
All Trig math functions (sin, cos, sinh, hypot...) can take a unit as their
parameter. It will be converted to radians and then used if possible.
### Temperatures
Ruby-units makes a distinction between a temperature (which technically is a
property) and degrees of temperature (which temperatures are measured in).
Temperature units (i.e., 'tempK') can be converted back and forth, and will take
into account the differences in the zero points of the various scales.
Differential temperature (e.g., Unit.new('100 degC')) units behave like most
other units.
```ruby
Unit.new('37 tempC').convert_to('tempF') #=> 98.6 tempF
```
Ruby-units will raise an exception if you attempt to create a temperature unit
that would fall below absolute zero.
Unit math on temperatures is fairly limited.
```ruby
Unit.new('100 tempC') + Unit.new('10 degC') # '110 tempC'.to_unit
Unit.new('100 tempC') - Unit.new('10 degC') # '90 tempC'.to_unit
Unit.new('100 tempC') + Unit.new('50 tempC') # exception (can't add two temperatures)
Unit.new('100 tempC') - Unit.new('50 tempC') # '50 degC'.to_unit (get the difference between two temperatures)
Unit.new('50 tempC') - Unit.new('100 tempC') # '-50 degC'.to_unit
Unit.new('100 tempC') * scalar # '100*scalar tempC'.to_unit
Unit.new('100 tempC') / scalar # '100/scalar tempC'.to_unit
Unit.new('100 tempC') * unit # exception
Unit.new('100 tempC') / unit # exception
Unit.new('100 tempC') ** N # exception
Unit.new('100 tempC').convert_to('degC') #=> Unit.new('100 degC')
```
This conversion references the 0 point on the scale of the temperature unit
```ruby
Unit.new('100 degC').convert_to('tempC') #=> '-173 tempC'.to_unit
```
These conversions are always interpreted as being relative to absolute zero.
Conversions are probably better done like this...
```ruby
Unit.new('0 tempC') + Unit.new('100 degC') #=> Unit.new('100 tempC')
```
### Defining Units
It is possible to define new units or redefine existing ones.
#### Define New Unit
The easiest approach is to define a unit in terms of other units.
```ruby
Unit.define("foobar") do |foobar|
foobar.definition = Unit.new("1 foo") * Unit.new("1 bar") # anything that results in a Unit object
foobar.aliases = %w{foobar fb} # array of synonyms for the unit
foobar.display_name = "Foobar" # How unit is displayed when output
end
```
#### Redefine Existing Unit
Redefining a unit allows the user to change a single aspect of a definition
without having to re-create the entire definition. This is useful for changing
display names, adding aliases, etc.
```ruby
Unit.redefine!("cup") do |cup|
cup.display_name = "cup"
end
```
### Useful methods
1. `scalar` will return the numeric portion of the unit without the attached
units
2. `base_scalar` will return the scalar in base units (SI)
3. `units` will return the name of the units (without the scalar)
4. `base` will return the unit converted to base units (SI)
### Storing in a database
Units can be stored in a database as either the string representation or in two
separate columns defining the scalar and the units. Note that if sorting by
units is desired you will want to ensure that you are storing the scalars in a
consistent unit (i.e, the base units).
### Namespaced Class
Sometimes the default class 'Unit' may conflict with other gems or applications.
Internally ruby-units defines itself using the RubyUnits namespace. The actual
class of a unit is the RubyUnits::Unit. For simplicity and backwards
compatibility, the `::Unit` class is defined as an alias to `::RubyUnits::Unit`.
To load ruby-units without this alias...
```ruby
require 'ruby_units/namespaced'
```
When using bundler...
```ruby
gem 'ruby-units', require: 'ruby_units/namespaced'
```
Note: when using the namespaced version, the `Unit.new('unit string')` helper
will not be defined.
### Configuration
Configuration options can be set like:
```ruby
RubyUnits.configure do |config|
config.format = :rational
config.separator = false
end
```
| Option | Description | Valid Values | Default |
|-----------|------------------------------------------------------------------------------------------------------------------------|---------------------------|-------------|
| format | Only used for output formatting. `:rational` is formatted like `3 m/s^2`. `:exponential` is formatted like `3 m*s^-2`. | `:rational, :exponential` | `:rational` |
| separator | Use a space separator for output. `true` is formatted like `3 m/s`, `false` is like `3m/s`. | `true, false` | `true` |
### NOTES
#### Performance vs. Accuracy
Ruby units was originally intended to provide a robust and accurate way to do
arbitrary unit conversions. In some cases, these conversions can result in the
creation and garbage collection of a lot of intermediate objects during
calculations. This in turn can have a negative impact on performance. The design
of ruby-units has emphasized accuracy over speed. YMMV if you are doing a lot of
math involving units.
## Support Policy
Only currently maintained versions of ruby and jruby are supported.
## License
[](https://app.fossa.io/projects/git%2Bgithub.com%2Folbrich%2Fruby-units?ref=badge_large)