legendGroup.selectAll('.calendar-heatmap-legend')
            .data(colorRange)
            .enter()
          .append('rect')
            .attr('class', 'calendar-heatmap-legend')

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

  donutChart.arc = d3.svg.arc()
    .outerRadius(radius * 0.7)
    .innerRadius(radius * 0.3);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

  donutChart.outerArc = d3.svg.arc()
    .outerRadius(radius * 0.9)
    .innerRadius(radius * 0.9);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

app.post('/login', passport.authenticate('local-login', { failureRedirect: '/login' }), 
  function(req, res) {
    res.redirect('/3219');
  });

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 45.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

app.post('/register', passport.authenticate('local-signup', { failureRedirect: '/register' }), 
  function(req, res) {
    res.redirect('/3219');
  });

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 45.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

notifDialog.emailCount = 0;

Close

Disallow Undeclared Variables (no-undef)

This rule can help you locate potential ReferenceErrors resulting from misspellings of variable and parameter names, or accidental implicit globals (for example, from forgetting the var keyword in a for loop initializer).

Rule Details

Any reference to an undeclared variable causes a warning, unless the variable is explicitly mentioned in a /*global ...*/ comment.

Examples of incorrect code for this rule:

/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

Examples of correct code for this rule with global declaration:

/*global someFunction b:true*/
/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

The b:true syntax in /*global */ indicates that assignment to b is correct.

Examples of incorrect code for this rule with global declaration:

/*global b*/
/*eslint no-undef: "error"*/

b = 10;

By default, variables declared in /*global */ are read-only, therefore assignment is incorrect.

Options

• typeof set to true will warn for variables used inside typeof check (Default false).

typeof

Examples of correct code for the default { "typeof": false } option:

/*eslint no-undef: "error"*/

if (typeof UndefinedIdentifier === "undefined") {
    // do something ...
}

You can use this option if you want to prevent typeof check on a variable which has not been declared.

Examples of incorrect code for the { "typeof": true } option:

/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Examples of correct code for the { "typeof": true } option with global declaration:

/*global a*/
/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Environments

For convenience, ESLint provides shortcuts that pre-define global variables exposed by popular libraries and runtime environments. This rule supports these environments, as listed in Specifying Environments. A few examples are given below.

browser

Examples of correct code for this rule with browser environment:

/*eslint no-undef: "error"*/
/*eslint-env browser*/

setTimeout(function() {
    alert("Hello");
});

node

Examples of correct code for this rule with node environment:

/*eslint no-undef: "error"*/
/*eslint-env node*/

var fs = require("fs");
module.exports = function() {
    console.log(fs);
};

When Not To Use It

If explicit declaration of global variables is not to your taste.

Compatibility

This rule provides compatibility with treatment of global variables in JSHint and JSLint. Source: http://eslint.org/docs/rules/

if (!notifDialog.dialog.showModal) {

Close

Disallow Undeclared Variables (no-undef)

This rule can help you locate potential ReferenceErrors resulting from misspellings of variable and parameter names, or accidental implicit globals (for example, from forgetting the var keyword in a for loop initializer).

Rule Details

Any reference to an undeclared variable causes a warning, unless the variable is explicitly mentioned in a /*global ...*/ comment.

Examples of incorrect code for this rule:

/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

Examples of correct code for this rule with global declaration:

/*global someFunction b:true*/
/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

The b:true syntax in /*global */ indicates that assignment to b is correct.

Examples of incorrect code for this rule with global declaration:

/*global b*/
/*eslint no-undef: "error"*/

b = 10;

By default, variables declared in /*global */ are read-only, therefore assignment is incorrect.

Options

• typeof set to true will warn for variables used inside typeof check (Default false).

typeof

Examples of correct code for the default { "typeof": false } option:

/*eslint no-undef: "error"*/

if (typeof UndefinedIdentifier === "undefined") {
    // do something ...
}

You can use this option if you want to prevent typeof check on a variable which has not been declared.

Examples of incorrect code for the { "typeof": true } option:

/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Examples of correct code for the { "typeof": true } option with global declaration:

/*global a*/
/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Environments

For convenience, ESLint provides shortcuts that pre-define global variables exposed by popular libraries and runtime environments. This rule supports these environments, as listed in Specifying Environments. A few examples are given below.

browser

Examples of correct code for this rule with browser environment:

/*eslint no-undef: "error"*/
/*eslint-env browser*/

setTimeout(function() {
    alert("Hello");
});

node

Examples of correct code for this rule with node environment:

/*eslint no-undef: "error"*/
/*eslint-env node*/

var fs = require("fs");
module.exports = function() {
    console.log(fs);
};

When Not To Use It

If explicit declaration of global variables is not to your taste.

Compatibility

This rule provides compatibility with treatment of global variables in JSHint and JSLint. Source: http://eslint.org/docs/rules/

notifDialog.dialog.querySelector('.remove-email-btn').addEventListener('click', removeEmailInput);

Close

Disallow Undeclared Variables (no-undef)

This rule can help you locate potential ReferenceErrors resulting from misspellings of variable and parameter names, or accidental implicit globals (for example, from forgetting the var keyword in a for loop initializer).

Rule Details

Any reference to an undeclared variable causes a warning, unless the variable is explicitly mentioned in a /*global ...*/ comment.

Examples of incorrect code for this rule:

/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

Examples of correct code for this rule with global declaration:

/*global someFunction b:true*/
/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

The b:true syntax in /*global */ indicates that assignment to b is correct.

Examples of incorrect code for this rule with global declaration:

/*global b*/
/*eslint no-undef: "error"*/

b = 10;

By default, variables declared in /*global */ are read-only, therefore assignment is incorrect.

Options

• typeof set to true will warn for variables used inside typeof check (Default false).

typeof

Examples of correct code for the default { "typeof": false } option:

/*eslint no-undef: "error"*/

if (typeof UndefinedIdentifier === "undefined") {
    // do something ...
}

You can use this option if you want to prevent typeof check on a variable which has not been declared.

Examples of incorrect code for the { "typeof": true } option:

/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Examples of correct code for the { "typeof": true } option with global declaration:

/*global a*/
/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Environments

For convenience, ESLint provides shortcuts that pre-define global variables exposed by popular libraries and runtime environments. This rule supports these environments, as listed in Specifying Environments. A few examples are given below.

browser

Examples of correct code for this rule with browser environment:

/*eslint no-undef: "error"*/
/*eslint-env browser*/

setTimeout(function() {
    alert("Hello");
});

node

Examples of correct code for this rule with node environment:

/*eslint no-undef: "error"*/
/*eslint-env node*/

var fs = require("fs");
module.exports = function() {
    console.log(fs);
};

When Not To Use It

If explicit declaration of global variables is not to your taste.

Compatibility

This rule provides compatibility with treatment of global variables in JSHint and JSLint. Source: http://eslint.org/docs/rules/

    btns[0].setAttribute("disabled", "true");

Close

enforce the consistent use of either backticks, double, or single quotes (quotes)

JavaScript allows you to define strings in one of three ways: double quotes, single quotes, and backticks (as of ECMAScript 6). For example:

/*eslint-env es6*/

var double = "double";
var single = 'single';
var backtick = `backtick`;    // ES6 only

Each of these lines creates a string and, in some cases, can be used interchangeably. The choice of how to define strings in a codebase is a stylistic one outside of template literals (which allow embedded of expressions to be interpreted).

Many codebases require strings to be defined in a consistent manner.

Rule Details

This rule enforces the consistent use of either backticks, double, or single quotes.

Options

This rule has two options, a string option and an object option.

String option:

• "double" (default) requires the use of double quotes wherever possible
• "single" requires the use of single quotes wherever possible
• "backtick" requires the use of backticks wherever possible

Object option:

• "avoidEscape": true allows strings to use single-quotes or double-quotes so long as the string contains a quote that would have to be escaped otherwise
• "allowTemplateLiterals": true allows strings to use backticks

Deprecated: The object property avoid-escape is deprecated; please use the object property avoidEscape instead.

double

Examples of incorrect code for this rule with the default "double" option:

/*eslint quotes: ["error", "double"]*/

var single = 'single';
var unescaped = 'a string containing "double" quotes';

Examples of correct code for this rule with the default "double" option:

/*eslint quotes: ["error", "double"]*/
/*eslint-env es6*/

var double = "double";
var backtick = `back\ntick`;  // backticks are allowed due to newline
var backtick = tag`backtick`; // backticks are allowed due to tag

single

Examples of incorrect code for this rule with the "single" option:

/*eslint quotes: ["error", "single"]*/

var double = "double";
var unescaped = "a string containing 'single' quotes";

Examples of correct code for this rule with the "single" option:

/*eslint quotes: ["error", "single"]*/
/*eslint-env es6*/

var single = 'single';
var backtick = `back${x}tick`; // backticks are allowed due to substitution

backticks

Examples of incorrect code for this rule with the "backtick" option:

/*eslint quotes: ["error", "backtick"]*/

var single = 'single';
var double = "double";
var unescaped = 'a string containing `backticks`';

Examples of correct code for this rule with the "backtick" option:

/*eslint quotes: ["error", "backtick"]*/
/*eslint-env es6*/

var backtick = `backtick`;

avoidEscape

Examples of additional correct code for this rule with the "double", { "avoidEscape": true } options:

/*eslint quotes: ["error", "double", { "avoidEscape": true }]*/

var single = 'a string containing "double" quotes';

Examples of additional correct code for this rule with the "single", { "avoidEscape": true } options:

/*eslint quotes: ["error", "single", { "avoidEscape": true }]*/

var double = "a string containing 'single' quotes";

Examples of additional correct code for this rule with the "backtick", { "avoidEscape": true } options:

/*eslint quotes: ["error", "backtick", { "avoidEscape": true }]*/

var double = "a string containing `backtick` quotes"

allowTemplateLiterals

Examples of additional correct code for this rule with the "double", { "allowTemplateLiterals": true } options:

/*eslint quotes: ["error", "double", { "allowTemplateLiterals": true }]*/

var double = "double";
var double = `double`;

Examples of additional correct code for this rule with the "single", { "allowTemplateLiterals": true } options:

/*eslint quotes: ["error", "single", { "allowTemplateLiterals": true }]*/

var single = 'single';
var single = `single`;

When Not To Use It

If you do not need consistency in your string styles, you can safely disable this rule. Source: http://eslint.org/docs/rules/