var source = void 0;

Close

Disallow use of the void operator. (no-void)

The void operator takes an operand and returns undefined: void expression will evaluate expression and return undefined. It can be used to ignore any side effects expression may produce:

The common case of using void operator is to get a "pure" undefined value as prior to ES5 the undefined variable was mutable:

// will always return undefined
(function(){
    return void 0;
})();

// will return 1 in ES3 and undefined in ES5+
(function(){
    undefined = 1;
    return undefined;
})();

// will throw TypeError in ES5+
(function(){
    'use strict';
    undefined = 1;
})();

Another common case is to minify code as void 0 is shorter than undefined:

foo = void 0;
foo = undefined;

When used with IIFE (immediately-invoked function expression), void can be used to force the function keyword to be treated as an expression instead of a declaration:

var foo = 1;
void function(){ foo = 1; }() // will assign foo a value of 1
+function(){ foo = 1; }() // same as above

function(){ foo = 1; }() // will throw SyntaxError

Some code styles prohibit void operator, marking it as non-obvious and hard to read.

Rule Details

This rule aims to eliminate use of void operator.

Examples of incorrect code for this rule:

/*eslint no-void: "error"*/

void foo

var foo = void bar();

When Not To Use It

If you intentionally use the void operator then you can disable this rule.

Further Reading

• Mozilla Developer Network
• Bad Parts: Appendix B - JavaScript: The Good Parts by Douglas Crockford

Related Rules

• [no-undef-init](no-undef-init.md)
• [no-undefined](no-undefined.md) Source: http://eslint.org/docs/rules/

    /^(A|AA|AAA)$/i

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

  ).option(

Close

require a newline after each call in a method chain (newline-per-chained-call)

Chained method calls on a single line without line breaks are harder to read, so some developers place a newline character after each method call in the chain to make it more readable and easy to maintain.

Let's look at the following perfectly valid (but single line) code.

d3.select("body").selectAll("p").data([4, 8, 15, 16, 23, 42 ]).enter().append("p").text(function(d) { return "I'm number " + d + "!"; });

However, with appropriate new lines, it becomes easy to read and understand. Look at the same code written below with line breaks after each call.

d3
    .select("body")
    .selectAll("p")
    .data([
        4,
        8,
        15,
        16,
        23,
        42
    ])
    .enter()
    .append("p")
    .text(function (d) {
        return "I'm number " + d + "!";
    });

Another argument in favor of this style is that it improves the clarity of diffs when something in the method chain is changed:

Less clear:

-d3.select("body").selectAll("p").style("color", "white");
+d3.select("body").selectAll("p").style("color", "blue");

More clear:

d3
    .select("body")
    .selectAll("p")
-    .style("color", "white");
+    .style("color", "blue");

Rule Details

This rule requires a newline after each call in a method chain or deep member access. Computed property accesses such as instance[something] are excluded.

Options

This rule has an object option:

• "ignoreChainWithDepth" (default: 2) allows chains up to a specified depth.

ignoreChainWithDepth

Examples of incorrect code for this rule with the default { "ignoreChainWithDepth": 2 } option:

/*eslint newline-per-chained-call: ["error", { "ignoreChainWithDepth": 2 }]*/

_.chain({}).map(foo).filter(bar).value();

// Or
_.chain({}).map(foo).filter(bar);

// Or
_
  .chain({}).map(foo)
  .filter(bar);

// Or
obj.method().method2().method3();

Examples of correct code for this rule with the default { "ignoreChainWithDepth": 2 } option:

/*eslint newline-per-chained-call: ["error", { "ignoreChainWithDepth": 2 }]*/

_
  .chain({})
  .map(foo)
  .filter(bar)
  .value();

// Or
_
  .chain({})
  .map(foo)
  .filter(bar);

// Or
_.chain({})
  .map(foo)
  .filter(bar);

// Or
obj
  .prop
  .method().prop;

// Or
obj
  .prop.method()
  .method2()
  .method3().prop;

When Not To Use It

If you have conflicting rules or when you are fine with chained calls on one line, you can safely turn this rule off. Source: http://eslint.org/docs/rules/

var _tenonReporters2 = _interopRequireDefault(_tenonReporters);

Close

disallow dangling underscores in identifiers (no-underscore-dangle)

As far as naming conventions for identifiers go, dangling underscores may be the most polarizing in JavaScript. Dangling underscores are underscores at either the beginning or end of an identifier, such as:

var _foo;

There is actually a long history of using dangling underscores to indicate "private" members of objects in JavaScript (though JavaScript doesn't have truly private members, this convention served as a warning). This began with SpiderMonkey adding nonstandard methods such as __defineGetter__(). The intent with the underscores was to make it obvious that this method was special in some way. Since that time, using a single underscore prefix has become popular as a way to indicate "private" members of objects.

Whether or not you choose to allow dangling underscores in identifiers is purely a convention and has no effect on performance, readability, or complexity. It's purely a preference.

Rule Details

This rule disallows dangling underscores in identifiers.

Examples of incorrect code for this rule:

/*eslint no-underscore-dangle: "error"*/

var foo_;
var __proto__ = {};
foo._bar();

Examples of correct code for this rule:

/*eslint no-underscore-dangle: "error"*/

var _ = require('underscore');
var obj = _.contains(items, item);
obj.__proto__ = {};
var file = __filename;

Options

This rule has an object option:

• "allow" allows specified identifiers to have dangling underscores
• "allowAfterThis": false (default) disallows dangling underscores in members of the this object
• "allowAfterSuper": false (default) disallows dangling underscores in members of the super object

allow

Examples of additional correct code for this rule with the { "allow": ["foo_", "_bar"] } option:

/*eslint no-underscore-dangle: ["error", { "allow": ["foo_", "_bar"] }]*/

var foo_;
foo._bar();

allowAfterThis

Examples of correct code for this rule with the { "allowAfterThis": true } option:

/*eslint no-underscore-dangle: ["error", { "allowAfterThis": true }]*/

var a = this.foo_;
this._bar();

allowAfterSuper

Examples of correct code for this rule with the { "allowAfterSuper": true } option:

/*eslint no-underscore-dangle: ["error", { "allowAfterSuper": true }]*/

var a = super.foo_;
super._bar();

When Not To Use It

If you want to allow dangling underscores in identifiers, then you can safely turn this rule off. Source: http://eslint.org/docs/rules/

  var program = (0, _.parseCommand)(process.argv);

Close

require let or const instead of var (no-var)

ECMAScript 6 allows programmers to create variables with block scope instead of function scope using the let and const keywords. Block scope is common in many other programming languages and helps programmers avoid mistakes such as:

var count = people.length;
var enoughFood = count > sandwiches.length;

if (enoughFood) {
    var count = sandwiches.length; // accidentally overriding the count variable
    console.log("We have " + count + " sandwiches for everyone. Plenty for all!");
}

// our count variable is no longer accurate
console.log("We have " + count + " people and " + sandwiches.length + " sandwiches!");

Rule Details

This rule is aimed at discouraging the use of var and encouraging the use of const or let instead.

Examples

Examples of incorrect code for this rule:

/*eslint no-var: "error"*/

var x = "y";
var CONFIG = {};

Examples of correct code for this rule:

/*eslint no-var: "error"*/
/*eslint-env es6*/

let x = "y";
const CONFIG = {};

When Not To Use It

In addition to non-ES6 environments, existing JavaScript projects that are beginning to introduce ES6 into their codebase may not want to apply this rule if the cost of migrating from var to let is too costly. Source: http://eslint.org/docs/rules/

  var allOptions = Object.assign({}, configuration, program.commands[0]);

Close

Require Variable Declarations to be at the top of their scope (vars-on-top)

The vars-on-top rule generates warnings when variable declarations are not used serially at the top of a function scope or the top of a program. By default variable declarations are always moved (“hoisted”) invisibly to the top of their containing scope by the JavaScript interpreter. This rule forces the programmer to represent that behaviour by manually moving the variable declaration to the top of its containing scope.

Rule Details

This rule aims to keep all variable declarations in the leading series of statements. Allowing multiple declarations helps promote maintainability and is thus allowed.

Examples of incorrect code for this rule:

/*eslint vars-on-top: "error"*/

// Variable declarations in a block:
function doSomething() {
    var first;
    if (true) {
        first = true;
    }
    var second;
}

// Variable declaration in for initializer:
function doSomething() {
    for (var i=0; i<10; i++) {}
}

/*eslint vars-on-top: "error"*/

// Variables after other statements:
f();
var a;

Examples of correct code for this rule:

/*eslint vars-on-top: "error"*/

function doSomething() {
    var first;
    var second; //multiple declarations are allowed at the top
    if (true) {
        first = true;
    }
}

function doSomething() {
    var i;
    for (i=0; i<10; i++) {}
}

/*eslint vars-on-top: "error"*/

var a;
f();

/*eslint vars-on-top: "error"*/

// Directives may precede variable declarations.
"use strict";
var a;
f();

// Comments can describe variables.
function doSomething() {
    // this is the first var.
    var first;
    // this is the second var.
    var second
}

Further Reading

• JavaScript Scoping and Hoisting
• var Hoisting
• A criticism of the Single Var Pattern in JavaScript, and a simple alternative
• Multiple var statements in JavaScript, not superfluous Source: http://eslint.org/docs/rules/

  var tenonApi = new _tenonNode2.default({

Close

require let or const instead of var (no-var)

ECMAScript 6 allows programmers to create variables with block scope instead of function scope using the let and const keywords. Block scope is common in many other programming languages and helps programmers avoid mistakes such as:

var count = people.length;
var enoughFood = count > sandwiches.length;

if (enoughFood) {
    var count = sandwiches.length; // accidentally overriding the count variable
    console.log("We have " + count + " sandwiches for everyone. Plenty for all!");
}

// our count variable is no longer accurate
console.log("We have " + count + " people and " + sandwiches.length + " sandwiches!");

Rule Details

This rule is aimed at discouraging the use of var and encouraging the use of const or let instead.

Examples

Examples of incorrect code for this rule:

/*eslint no-var: "error"*/

var x = "y";
var CONFIG = {};

Examples of correct code for this rule:

/*eslint no-var: "error"*/
/*eslint-env es6*/

let x = "y";
const CONFIG = {};

When Not To Use It

In addition to non-ES6 environments, existing JavaScript projects that are beginning to introduce ES6 into their codebase may not want to apply this rule if the cost of migrating from var to let is too costly. Source: http://eslint.org/docs/rules/

    endPoint: allOptions.endpoint // or your private tenon instance

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

      console.error('Failed to write file...');

Close

disallow the use of console (no-console)

In JavaScript that is designed to be executed in the browser, it's considered a best practice to avoid using methods on console. Such messages are considered to be for debugging purposes and therefore not suitable to ship to the client. In general, calls using console should be stripped before being pushed to production.

console.log("Made it here.");
console.error("That shouldn't have happened.");

Rule Details

This rule disallows calls to methods of the console object.

Examples of incorrect code for this rule:

/*eslint no-console: "error"*/

console.log("Log a debug level message.");
console.warn("Log a warn level message.");
console.error("Log an error level message.");

Examples of correct code for this rule:

/*eslint no-console: "error"*/

// custom console
Console.log("Hello world!");

Options

This rule has an object option for exceptions:

• "allow" has an array of strings which are allowed methods of the console object

Examples of additional correct code for this rule with a sample { "allow": ["warn", "error"] } option:

/*eslint no-console: ["error", { allow: ["warn", "error"] }] */

console.warn("Log a warn level message.");
console.error("Log an error level message.");

When Not To Use It

If you're using Node.js, however, console is used to output information to the user and so is not strictly used for debugging purposes. If you are developing for Node.js then you most likely do not want this rule enabled.

Related Rules

• [no-alert](no-alert.md)
• [no-debugger](no-debugger.md) Source: http://eslint.org/docs/rules/

      console.error(err);

Close

disallow the use of console (no-console)

In JavaScript that is designed to be executed in the browser, it's considered a best practice to avoid using methods on console. Such messages are considered to be for debugging purposes and therefore not suitable to ship to the client. In general, calls using console should be stripped before being pushed to production.

console.log("Made it here.");
console.error("That shouldn't have happened.");

Rule Details

This rule disallows calls to methods of the console object.

Examples of incorrect code for this rule:

/*eslint no-console: "error"*/

console.log("Log a debug level message.");
console.warn("Log a warn level message.");
console.error("Log an error level message.");

Examples of correct code for this rule:

/*eslint no-console: "error"*/

// custom console
Console.log("Hello world!");

Options

This rule has an object option for exceptions:

• "allow" has an array of strings which are allowed methods of the console object

Examples of additional correct code for this rule with a sample { "allow": ["warn", "error"] } option:

/*eslint no-console: ["error", { allow: ["warn", "error"] }] */

console.warn("Log a warn level message.");
console.error("Log an error level message.");

When Not To Use It

If you're using Node.js, however, console is used to output information to the user and so is not strictly used for debugging purposes. If you are developing for Node.js then you most likely do not want this rule enabled.

Related Rules

• [no-alert](no-alert.md)
• [no-debugger](no-debugger.md) Source: http://eslint.org/docs/rules/

  ).option(

Close

require a newline after each call in a method chain (newline-per-chained-call)

Chained method calls on a single line without line breaks are harder to read, so some developers place a newline character after each method call in the chain to make it more readable and easy to maintain.

Let's look at the following perfectly valid (but single line) code.

d3.select("body").selectAll("p").data([4, 8, 15, 16, 23, 42 ]).enter().append("p").text(function(d) { return "I'm number " + d + "!"; });

However, with appropriate new lines, it becomes easy to read and understand. Look at the same code written below with line breaks after each call.

d3
    .select("body")
    .selectAll("p")
    .data([
        4,
        8,
        15,
        16,
        23,
        42
    ])
    .enter()
    .append("p")
    .text(function (d) {
        return "I'm number " + d + "!";
    });

Another argument in favor of this style is that it improves the clarity of diffs when something in the method chain is changed:

Less clear:

-d3.select("body").selectAll("p").style("color", "white");
+d3.select("body").selectAll("p").style("color", "blue");

More clear:

d3
    .select("body")
    .selectAll("p")
-    .style("color", "white");
+    .style("color", "blue");

Rule Details

This rule requires a newline after each call in a method chain or deep member access. Computed property accesses such as instance[something] are excluded.

Options

This rule has an object option:

• "ignoreChainWithDepth" (default: 2) allows chains up to a specified depth.

ignoreChainWithDepth

Examples of incorrect code for this rule with the default { "ignoreChainWithDepth": 2 } option:

/*eslint newline-per-chained-call: ["error", { "ignoreChainWithDepth": 2 }]*/

_.chain({}).map(foo).filter(bar).value();

// Or
_.chain({}).map(foo).filter(bar);

// Or
_
  .chain({}).map(foo)
  .filter(bar);

// Or
obj.method().method2().method3();

Examples of correct code for this rule with the default { "ignoreChainWithDepth": 2 } option:

/*eslint newline-per-chained-call: ["error", { "ignoreChainWithDepth": 2 }]*/

_
  .chain({})
  .map(foo)
  .filter(bar)
  .value();

// Or
_
  .chain({})
  .map(foo)
  .filter(bar);

// Or
_.chain({})
  .map(foo)
  .filter(bar);

// Or
obj
  .prop
  .method().prop;

// Or
obj
  .prop.method()
  .method2()
  .method3().prop;

When Not To Use It

If you have conflicting rules or when you are fine with chained calls on one line, you can safely turn this rule off. Source: http://eslint.org/docs/rules/

    /^(0|20|40|60|80|100)$/i

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    'An optional value'

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    'A string of text used to identify the page being tested'

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    parseFloat

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    parseFloat

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

var _fs = require('fs');

Close

require let or const instead of var (no-var)

ECMAScript 6 allows programmers to create variables with block scope instead of function scope using the let and const keywords. Block scope is common in many other programming languages and helps programmers avoid mistakes such as:

var count = people.length;
var enoughFood = count > sandwiches.length;

if (enoughFood) {
    var count = sandwiches.length; // accidentally overriding the count variable
    console.log("We have " + count + " sandwiches for everyone. Plenty for all!");
}

// our count variable is no longer accurate
console.log("We have " + count + " people and " + sandwiches.length + " sandwiches!");

Rule Details

This rule is aimed at discouraging the use of var and encouraging the use of const or let instead.

Examples

Examples of incorrect code for this rule:

/*eslint no-var: "error"*/

var x = "y";
var CONFIG = {};

Examples of correct code for this rule:

/*eslint no-var: "error"*/
/*eslint-env es6*/

let x = "y";
const CONFIG = {};

When Not To Use It

In addition to non-ES6 environments, existing JavaScript projects that are beginning to introduce ES6 into their codebase may not want to apply this rule if the cost of migrating from var to let is too costly. Source: http://eslint.org/docs/rules/

var _getStdin2 = _interopRequireDefault(_getStdin);

Close

Disallow Early Use (no-use-before-define)

In JavaScript, prior to ES6, variable and function declarations are hoisted to the top of a scope, so it's possible to use identifiers before their formal declarations in code. This can be confusing and some believe it is best to always declare variables and functions before using them.

In ES6, block-level bindings (let and const) introduce a "temporal dead zone" where a ReferenceError will be thrown with any attempt to access the variable before its declaration.

Rule Details

This rule will warn when it encounters a reference to an identifier that has not yet been declared.

Examples of incorrect code for this rule:

/*eslint no-use-before-define: "error"*/
/*eslint-env es6*/

alert(a);
var a = 10;

f();
function f() {}

function g() {
    return b;
}
var b = 1;

// With blockBindings: true
{
    alert(c);
    let c = 1;
}

Examples of correct code for this rule:

/*eslint no-use-before-define: "error"*/
/*eslint-env es6*/

var a;
a = 10;
alert(a);

function f() {}
f(1);

var b = 1;
function g() {
    return b;
}

// With blockBindings: true
{
    let C;
    c++;
}

Options

{
    "no-use-before-define": ["error", { "functions": true, "classes": true }]
}

• functions (boolean) - The flag which shows whether or not this rule checks function declarations. If this is true, this rule warns every reference to a function before the function declaration. Otherwise, ignores those references. Function declarations are hoisted, so it's safe. Default is true.
• classes (boolean) - The flag which shows whether or not this rule checks class declarations of upper scopes. If this is true, this rule warns every reference to a class before the class declaration. Otherwise, ignores those references if the declaration is in upper function scopes. Class declarations are not hoisted, so it might be danger. Default is true.
• variables (boolean) - This flag determines whether or not the rule checks variable declarations in upper scopes. If this is true, the rule warns every reference to a variable before the variable declaration. Otherwise, the rule ignores a reference if the declaration is in an upper scope, while still reporting the reference if it's in the same scope as the declaration. Default is true.

This rule accepts "nofunc" string as an option. "nofunc" is the same as { "functions": false, "classes": true }.

functions

Examples of correct code for the { "functions": false } option:

/*eslint no-use-before-define: ["error", { "functions": false }]*/

f();
function f() {}

classes

Examples of incorrect code for the { "classes": false } option:

/*eslint no-use-before-define: ["error", { "classes": false }]*/
/*eslint-env es6*/

new A();
class A {
}

Examples of correct code for the { "classes": false } option:

/*eslint no-use-before-define: ["error", { "classes": false }]*/
/*eslint-env es6*/

function foo() {
    return new A();
}

class A {
}

variables

Examples of incorrect code for the { "variables": false } option:

/*eslint no-use-before-define: ["error", { "variables": false }]*/

console.log(foo);
var foo = 1;

Examples of correct code for the { "variables": false } option:

/*eslint no-use-before-define: ["error", { "variables": false }]*/

function baz() {
    console.log(foo);
}

var foo = 1;

Source: http://eslint.org/docs/rules/

  var defaults = {

Close

Require Variable Declarations to be at the top of their scope (vars-on-top)

The vars-on-top rule generates warnings when variable declarations are not used serially at the top of a function scope or the top of a program. By default variable declarations are always moved (“hoisted”) invisibly to the top of their containing scope by the JavaScript interpreter. This rule forces the programmer to represent that behaviour by manually moving the variable declaration to the top of its containing scope.

Rule Details

This rule aims to keep all variable declarations in the leading series of statements. Allowing multiple declarations helps promote maintainability and is thus allowed.

Examples of incorrect code for this rule:

/*eslint vars-on-top: "error"*/

// Variable declarations in a block:
function doSomething() {
    var first;
    if (true) {
        first = true;
    }
    var second;
}

// Variable declaration in for initializer:
function doSomething() {
    for (var i=0; i<10; i++) {}
}

/*eslint vars-on-top: "error"*/

// Variables after other statements:
f();
var a;

Examples of correct code for this rule:

/*eslint vars-on-top: "error"*/

function doSomething() {
    var first;
    var second; //multiple declarations are allowed at the top
    if (true) {
        first = true;
    }
}

function doSomething() {
    var i;
    for (i=0; i<10; i++) {}
}

/*eslint vars-on-top: "error"*/

var a;
f();

/*eslint vars-on-top: "error"*/

// Directives may precede variable declarations.
"use strict";
var a;
f();

// Comments can describe variables.
function doSomething() {
    // this is the first var.
    var first;
    // this is the second var.
    var second
}

Further Reading

• JavaScript Scoping and Hoisting
• var Hoisting
• A criticism of the Single Var Pattern in JavaScript, and a simple alternative
• Multiple var statements in JavaScript, not superfluous Source: http://eslint.org/docs/rules/

  Object.keys(defaults).forEach(function (key) {

Close

Require or disallow named function expressions (func-names)

A pattern that's becoming more common is to give function expressions names to aid in debugging. For example:

Foo.prototype.bar = function bar() {};

Adding the second bar in the above example is optional. If you leave off the function name then when the function throws an exception you are likely to get something similar to anonymous function in the stack trace. If you provide the optional name for a function expression then you will get the name of the function expression in the stack trace.

Rule Details

This rule can enforce or disallow the use of named function expressions.

Options

This rule has a string option:

• "always" (default) requires function expressions to have a name
• "as-needed" requires function expressions to have a name, if the name cannot be assigned automatically in an ES6 environment
• "never" disallows named function expressions, except in recursive functions, where a name is needed

always

Examples of incorrect code for this rule with the default "always" option:

/*eslint func-names: ["error", "always"]*/

Foo.prototype.bar = function() {};

(function() {
    // ...
}())

Examples of correct code for this rule with the default "always" option:

/*eslint func-names: ["error", "always"]*/

Foo.prototype.bar = function bar() {};

(function bar() {
    // ...
}())

as-needed

ECMAScript 6 introduced a name property on all functions. The value of name is determined by evaluating the code around the function to see if a name can be inferred. For example, a function assigned to a variable will automatically have a name property equal to the name of the variable. The value of name is then used in stack traces for easier debugging.

Examples of incorrect code for this rule with the default "as-needed" option:

/*eslint func-names: ["error", "as-needed"]*/

Foo.prototype.bar = function() {};

(function() {
    // ...
}())

Examples of correct code for this rule with the default "as-needed" option:

/*eslint func-names: ["error", "as-needed"]*/

var bar = function() {};

(function bar() {
    // ...
}())

never

Examples of incorrect code for this rule with the "never" option:

/*eslint func-names: ["error", "never"]*/

Foo.prototype.bar = function bar() {};

(function bar() {
    // ...
}())

Examples of correct code for this rule with the "never" option:

/*eslint func-names: ["error", "never"]*/

Foo.prototype.bar = function() {};

(function() {
    // ...
}())

Further Reading

• Functions Explained
• Function Names in ES6

Compatibility

• JSCS: requireAnonymousFunctions
• JSCS: disallowAnonymousFunctions Source: http://eslint.org/docs/rules/