Showing 4,240 of 4,240 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('supports label translation', async () => {
const untranslatedOptions = [
{
value: 0,
label: 'Item A (%s)',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 466.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
export type UserDetailAttributesFragment = { __typename?: 'User', id: string, internalId: number, firstname?: string | null, lastname?: string | null, fullname?: string | null, image?: string | null, email?: string | null, web?: string | null, vip?: boolean | null, phone?: string | null, mobile?: string | null, fax?: string | null, note?: string | null, active?: boolean | null, hasSecondaryOrganizations?: boolean | null, objectAttributeValues?: Array<{ __typename?: 'ObjectAttributeValue', value?: any | null, renderedLink?: string | null, attribute: { __typename?: 'ObjectManagerFrontendAttribute', name: string, display: string } }> | null, organization?: { __typename?: 'Organization', id: string, internalId: number, name?: string | null, active?: boolean | null, vip?: boolean | null, ticketsCount?: { __typename?: 'TicketCount', open: number, closed: number } | null } | null, secondaryOrganizations?: { __typename?: 'OrganizationConnection', totalCount: number, edges: Array<{ __typename?: 'OrganizationEdge', node: { __typename?: 'Organization', id: string, internalId: number, active?: boolean | null, name?: string | null } }> } | null, ticketsCount?: { __typename?: 'TicketCount', open: number, closed: number } | null };
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 465.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
export type UserUpdatesSubscription = { __typename?: 'Subscriptions', userUpdates: { __typename?: 'UserUpdatesPayload', user?: { __typename?: 'User', id: string, internalId: number, firstname?: string | null, lastname?: string | null, fullname?: string | null, image?: string | null, email?: string | null, web?: string | null, vip?: boolean | null, phone?: string | null, mobile?: string | null, fax?: string | null, note?: string | null, active?: boolean | null, hasSecondaryOrganizations?: boolean | null, objectAttributeValues?: Array<{ __typename?: 'ObjectAttributeValue', value?: any | null, renderedLink?: string | null, attribute: { __typename?: 'ObjectManagerFrontendAttribute', name: string, display: string } }> | null, organization?: { __typename?: 'Organization', id: string, internalId: number, name?: string | null, active?: boolean | null, vip?: boolean | null, ticketsCount?: { __typename?: 'TicketCount', open: number, closed: number } | null } | null, secondaryOrganizations?: { __typename?: 'OrganizationConnection', totalCount: number, edges: Array<{ __typename?: 'OrganizationEdge', node: { __typename?: 'Organization', id: string, internalId: number, active?: boolean | null, name?: string | null } }> } | null, ticketsCount?: { __typename?: 'TicketCount', open: number, closed: number } | null } | null } };
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 465.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
export type CurrentUserQuery = { __typename?: 'Queries', currentUser: { __typename?: 'User', email?: string | null, id: string, internalId: number, firstname?: string | null, lastname?: string | null, fullname?: string | null, image?: string | null, outOfOffice?: boolean | null, outOfOfficeStartAt?: string | null, outOfOfficeEndAt?: string | null, preferences?: any | null, hasSecondaryOrganizations?: boolean | null, permissions?: { __typename?: 'UserPermission', names: Array<string> } | null, outOfOfficeReplacement?: { __typename?: 'User', id: string, internalId: number, firstname?: string | null, lastname?: string | null, fullname?: string | null, login?: string | null, phone?: string | null, email?: string | null } | null, objectAttributeValues?: Array<{ __typename?: 'ObjectAttributeValue', value?: any | null, renderedLink?: string | null, attribute: { __typename?: 'ObjectManagerFrontendAttribute', name: string, display: string } }> | null, organization?: { __typename?: 'Organization', id: string, internalId: number, name?: string | null, active?: boolean | null, objectAttributeValues?: Array<{ __typename?: 'ObjectAttributeValue', value?: any | null, renderedLink?: string | null, attribute: { __typename?: 'ObjectManagerFrontendAttribute', name: string, display: string } }> | null } | null } };
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 461.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
export type CurrentUserAttributesFragment = { __typename?: 'User', email?: string | null, id: string, internalId: number, firstname?: string | null, lastname?: string | null, fullname?: string | null, image?: string | null, outOfOffice?: boolean | null, outOfOfficeStartAt?: string | null, outOfOfficeEndAt?: string | null, preferences?: any | null, hasSecondaryOrganizations?: boolean | null, permissions?: { __typename?: 'UserPermission', names: Array<string> } | null, outOfOfficeReplacement?: { __typename?: 'User', id: string, internalId: number, firstname?: string | null, lastname?: string | null, fullname?: string | null, login?: string | null, phone?: string | null, email?: string | null } | null, objectAttributeValues?: Array<{ __typename?: 'ObjectAttributeValue', value?: any | null, renderedLink?: string | null, attribute: { __typename?: 'ObjectManagerFrontendAttribute', name: string, display: string } }> | null, organization?: { __typename?: 'Organization', id: string, internalId: number, name?: string | null, active?: boolean | null, objectAttributeValues?: Array<{ __typename?: 'ObjectAttributeValue', value?: any | null, renderedLink?: string | null, attribute: { __typename?: 'ObjectManagerFrontendAttribute', name: string, display: string } }> | null } | null };
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 461.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
$.noty.layouts.centerRight = {
name : 'centerRight',
options : { // overrides options
},
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 448.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
$.noty.layouts.centerLeft = {
name : 'centerLeft',
options : { // overrides options
},
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 448.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
File FieldAutoComplete.spec.ts
has 1019 lines of code (exceeds 250 allowed). Consider refactoring. Open
// Copyright (C) 2012-2024 Zammad Foundation, https://zammad-foundation.org/
import { cloneDeep } from 'lodash-es'
import {
getAllByRole,
Identical blocks of code found in 2 locations. Consider refactoring. Open
window.zammadChatTemplates["typingIndicator"] = function(__obj) {
if (!__obj) __obj = {};
var __out = [], __capture = function(callback) {
var out = __out, result;
__out = [];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 442.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
window.zammadChatTemplates["typingIndicator"] = function(__obj) {
if (!__obj) __obj = {};
var __out = [], __capture = function(callback) {
var out = __out, result;
__out = [];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 442.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
File FieldSelect.spec.ts
has 1010 lines of code (exceeds 250 allowed). Consider refactoring. Open
// Copyright (C) 2012-2024 Zammad Foundation, https://zammad-foundation.org/
import type { SetRequired } from 'type-fest'
import { cloneDeep, keyBy } from 'lodash-es'
import { getByText, waitFor } from '@testing-library/vue'
File bootstrap-timepicker.js
has 995 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*!
* Timepicker Component for Twitter Bootstrap
*
* Copyright 2013 Joris de Wit
*
Function init
has 495 lines of code (exceeds 25 allowed). Consider refactoring. Open
function init(plot) // this is the "body" of the plugin
{
var canvas = null;
var target = null;
var maxRadius = null;
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('supports keyboard navigation', async () => {
const wrapper = renderComponent(FormKit, {
...wrapperParameters,
props: {
...commonProps,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 430.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('supports keyboard navigation', async () => {
const wrapper = renderComponent(FormKit, {
...wrapperParameters,
props: {
...testProps,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 430.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function QrCode
has 454 lines of code (exceeds 25 allowed). Consider refactoring. Open
var QrCode = /** @class */ (function () {
/*-- Constructor (low level) and fields --*/
// Creates a new QR Code with the given version number,
// error correction level, data codeword bytes, and mask number.
// This is a low-level API that most users should not use directly.
Similar blocks of code found in 2 locations. Consider refactoring. Open
ZammadChat.prototype.startTimeoutObservers = function() {
this.idleTimeout = new Timeout({
logPrefix: 'idleTimeout',
debug: this.options.debug,
timeout: this.options.idleTimeout,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 397.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
ZammadChat.prototype.startTimeoutObservers = function() {
this.idleTimeout = new Timeout({
logPrefix: 'idleTimeout',
debug: this.options.debug,
timeout: this.options.idleTimeout,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 397.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
var lookupColors = {
aqua:[0,255,255],
azure:[240,255,255],
beige:[245,245,220],
black:[0,0,0],
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 395.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
(function(B){B.color={};B.color.make=function(F,E,C,D){var G={};G.r=F||0;G.g=E||0;G.b=C||0;G.a=D!=null?D:1;G.add=function(J,I){for(var H=0;H<J.length;++H){G[J.charAt(H)]+=I}return G.normalize()};G.scale=function(J,I){for(var H=0;H<J.length;++H){G[J.charAt(H)]*=I}return G.normalize()};G.toString=function(){if(G.a>=1){return"rgb("+[G.r,G.g,G.b].join(",")+")"}else{return"rgba("+[G.r,G.g,G.b,G.a].join(",")+")"}};G.normalize=function(){function H(J,K,I){return K<J?J:(K>I?I:K)}G.r=H(0,parseInt(G.r),255);G.g=H(0,parseInt(G.g),255);G.b=H(0,parseInt(G.b),255);G.a=H(0,G.a,1);return G};G.clone=function(){return B.color.make(G.r,G.b,G.g,G.a)};return G.normalize()};B.color.extract=function(D,C){var E;do{E=D.css(C).toLowerCase();if(E!=""&&E!="transparent"){break}D=D.parent()}while(!B.nodeName(D.get(0),"body"));if(E=="rgba(0, 0, 0, 0)"){E="transparent"}return B.color.parse(E)};B.color.parse=function(F){var E,C=B.color.make;if(E=/rgb\(\s*([0-9]{1,3})\s*,\s*([0-9]{1,3})\s*,\s*([0-9]{1,3})\s*\)/.exec(F)){return C(parseInt(E[1],10),parseInt(E[2],10),parseInt(E[3],10))}if(E=/rgba\(\s*([0-9]{1,3})\s*,\s*([0-9]{1,3})\s*,\s*([0-9]{1,3})\s*,\s*([0-9]+(?:\.[0-9]+)?)\s*\)/.exec(F)){return C(parseInt(E[1],10),parseInt(E[2],10),parseInt(E[3],10),parseFloat(E[4]))}if(E=/rgb\(\s*([0-9]+(?:\.[0-9]+)?)\%\s*,\s*([0-9]+(?:\.[0-9]+)?)\%\s*,\s*([0-9]+(?:\.[0-9]+)?)\%\s*\)/.exec(F)){return C(parseFloat(E[1])*2.55,parseFloat(E[2])*2.55,parseFloat(E[3])*2.55)}if(E=/rgba\(\s*([0-9]+(?:\.[0-9]+)?)\%\s*,\s*([0-9]+(?:\.[0-9]+)?)\%\s*,\s*([0-9]+(?:\.[0-9]+)?)\%\s*,\s*([0-9]+(?:\.[0-9]+)?)\s*\)/.exec(F)){return C(parseFloat(E[1])*2.55,parseFloat(E[2])*2.55,parseFloat(E[3])*2.55,parseFloat(E[4]))}if(E=/#([a-fA-F0-9]{2})([a-fA-F0-9]{2})([a-fA-F0-9]{2})/.exec(F)){return C(parseInt(E[1],16),parseInt(E[2],16),parseInt(E[3],16))}if(E=/#([a-fA-F0-9])([a-fA-F0-9])([a-fA-F0-9])/.exec(F)){return C(parseInt(E[1]+E[1],16),parseInt(E[2]+E[2],16),parseInt(E[3]+E[3],16))}var D=B.trim(F).toLowerCase();if(D=="transparent"){return C(255,255,255,0)}else{E=A[D]||[0,0,0];return C(E[0],E[1],E[2])}};var A={aqua:[0,255,255],azure:[240,255,255],beige:[245,245,220],black:[0,0,0],blue:[0,0,255],brown:[165,42,42],cyan:[0,255,255],darkblue:[0,0,139],darkcyan:[0,139,139],darkgrey:[169,169,169],darkgreen:[0,100,0],darkkhaki:[189,183,107],darkmagenta:[139,0,139],darkolivegreen:[85,107,47],darkorange:[255,140,0],darkorchid:[153,50,204],darkred:[139,0,0],darksalmon:[233,150,122],darkviolet:[148,0,211],fuchsia:[255,0,255],gold:[255,215,0],green:[0,128,0],indigo:[75,0,130],khaki:[240,230,140],lightblue:[173,216,230],lightcyan:[224,255,255],lightgreen:[144,238,144],lightgrey:[211,211,211],lightpink:[255,182,193],lightyellow:[255,255,224],lime:[0,255,0],magenta:[255,0,255],maroon:[128,0,0],navy:[0,0,128],olive:[128,128,0],orange:[255,165,0],pink:[255,192,203],purple:[128,0,128],violet:[128,0,128],red:[255,0,0],silver:[192,192,192],white:[255,255,255],yellow:[255,255,0]}})(jQuery);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 395.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76