Sign upLogin

avaframe/AvaFrame

View on GitHub
Star

Showing 656 of 974 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        cmap, _, ticks, norm = pU.makeColorMap(cmap, np.nanmin(maskedArray), np.nanmax(maskedArray),
                                               continuous=pU.contCmap)
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 2 other locations - About 50 mins to fix
avaframe/out3Plot/outCom1DFA.py on lines 230..230
avaframe/out3Plot/outQuickPlot.py on lines 506..506

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    cmap, _, ticks, norm = pU.makeColorMap(cmap, np.amin(variableC), np.amax(variableC), continuous=pU.contCmap)
Severity: Major
Found in avaframe/out3Plot/outCom1DFA.py and 2 other locations - About 50 mins to fix
avaframe/out3Plot/outAIMEC.py on lines 551..552
avaframe/out3Plot/outQuickPlot.py on lines 506..506

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    cmap, _, ticks, norm = pU.makeColorMap(pU.cmapVar, np.amin(varValV), np.amax(varValV), continuous=True)
Severity: Major
Found in avaframe/out3Plot/statsPlots.py and 3 other locations - About 50 mins to fix
avaframe/out3Plot/outAna1Plots.py on lines 953..954
avaframe/out3Plot/outDebugPlots.py on lines 213..213
avaframe/out3Plot/outDebugPlots.py on lines 267..267

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        elif np.isnan(rasterDEM[int(np.floor(Ly)), int(np.floor(Lx))]):
Severity: Minor
Found in avaframe/in2Trans/shpConversion.py and 1 other location - About 50 mins to fix
avaframe/in2Trans/shpConversion.py on lines 347..347

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        elif np.isnan(rasterDEM[int(np.floor(Ly)), int(np.floor(Lx))]):
Severity: Minor
Found in avaframe/in2Trans/shpConversion.py and 1 other location - About 50 mins to fix
avaframe/in2Trans/shpConversion.py on lines 306..306

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    cmap, _, ticks, norm = pU.makeColorMap(cmapType, np.nanmin(data1), np.nanmax(data1), continuous=pU.contCmap)
Severity: Major
Found in avaframe/out3Plot/outQuickPlot.py and 2 other locations - About 50 mins to fix
avaframe/out3Plot/outAIMEC.py on lines 551..552
avaframe/out3Plot/outCom1DFA.py on lines 230..230

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    ax4.plot(trackedPartProp['t'], trackedPartProp['uAcc'], zorder=1, linewidth=1.0, color=cmap(0.25))
Severity: Minor
Found in avaframe/out3Plot/outParticlesAnalysis.py and 1 other location - About 50 mins to fix
avaframe/out3Plot/outParticlesAnalysis.py on lines 315..315

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    ax2.plot(trackedPartProp['t'], trackedPartProp['trajectoryLengthXYZ'], zorder=2, linewidth=1.0, color=cmap(0.25))
Severity: Minor
Found in avaframe/out3Plot/outParticlesAnalysis.py and 1 other location - About 50 mins to fix
avaframe/out3Plot/outParticlesAnalysis.py on lines 346..346

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    scat = ax2.scatter(avaProfileMass['s'], zEne, marker='s', cmap=cmap, s=8*pU.ms, c=u2Path/(2*g),
Severity: Minor
Found in avaframe/ana1Tests/energyLineTest.py and 1 other location - About 50 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 168..168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        for dict in dictList:
            pickle.dump(dict, open(os.path.join(outDir, "particles%09.4f.p" % (dict['t'])), "wb"))
Severity: Minor
Found in avaframe/com1DFAOrig/com1DFAOrig.py and 1 other location - About 50 mins to fix
avaframe/com1DFAOrig/com1DFAOrig.py on lines 513..517

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    scat = ax3.scatter(avaProfileMass['s'], zEne-z0, marker='s', cmap=cmap, s=8*pU.ms, c=u2Path/(2*g),
Severity: Minor
Found in avaframe/ana1Tests/energyLineTest.py and 1 other location - About 50 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 124..124

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if isinstance(dictList, list):
        for dict in dictList:
            pickle.dump(dict, open(os.path.join(outDir, "particles%09.4f.p" % (dict['t'])), "wb"))
    else:
        pickle.dump(dictList, open(os.path.join(outDir, "particles%09.4f.p" % (dictList['t'])), "wb"))
Severity: Minor
Found in avaframe/com1DFAOrig/com1DFAOrig.py and 1 other location - About 50 mins to fix
avaframe/com1DFAOrig/com1DFAOrig.py on lines 514..515

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        splitPoint['x'] = splitPoint['x'] + dem['originalHeader']['xllcenter']
Severity: Major
Found in avaframe/ana5Utils/DFAPathGeneration.py and 5 other locations - About 45 mins to fix
avaframe/ana5Utils/DFAPathGeneration.py on lines 602..602
avaframe/ana5Utils/DFAPathGeneration.py on lines 603..603
avaframe/ana5Utils/DFAPathGeneration.py on lines 604..604
avaframe/com3Hybrid/com3Hybrid.py on lines 107..107
avaframe/com3Hybrid/com3Hybrid.py on lines 108..108

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

    deltas = rasterTransfo['s'][indVelZero] - rasterTransfo['s'][indVelStart]
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 9 other locations - About 45 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 251..251
avaframe/ana1Tests/energyLineTest.py on lines 252..252
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 524..525
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 527..530
avaframe/out3Plot/outAIMEC.py on lines 1186..1186
avaframe/out3Plot/outAIMEC.py on lines 1307..1307
avaframe/out3Plot/outAIMEC.py on lines 1308..1308
avaframe/out3Plot/outAIMEC.py on lines 1310..1310
avaframe/out3Plot/outAIMEC.py on lines 1311..1311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    avaProfileMass['x'] = avaProfileMass['x'] + dem['originalHeader']['xllcenter']
Severity: Major
Found in avaframe/ana5Utils/DFAPathGeneration.py and 5 other locations - About 45 mins to fix
avaframe/ana5Utils/DFAPathGeneration.py on lines 601..601
avaframe/ana5Utils/DFAPathGeneration.py on lines 602..602
avaframe/ana5Utils/DFAPathGeneration.py on lines 604..604
avaframe/com3Hybrid/com3Hybrid.py on lines 107..107
avaframe/com3Hybrid/com3Hybrid.py on lines 108..108

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

    deltaz = rasterTransfo['z'][indVelStart] - rasterTransfo['z'][indVelZero]
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 9 other locations - About 45 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 251..251
avaframe/ana1Tests/energyLineTest.py on lines 252..252
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 524..525
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 527..530
avaframe/out3Plot/outAIMEC.py on lines 1186..1186
avaframe/out3Plot/outAIMEC.py on lines 1187..1187
avaframe/out3Plot/outAIMEC.py on lines 1308..1308
avaframe/out3Plot/outAIMEC.py on lines 1310..1310
avaframe/out3Plot/outAIMEC.py on lines 1311..1311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

    deltas = rasterTransfo['s'][indVelZero] - rasterTransfo['s'][indVelStart]
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 9 other locations - About 45 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 251..251
avaframe/ana1Tests/energyLineTest.py on lines 252..252
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 524..525
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 527..530
avaframe/out3Plot/outAIMEC.py on lines 1186..1186
avaframe/out3Plot/outAIMEC.py on lines 1187..1187
avaframe/out3Plot/outAIMEC.py on lines 1307..1307
avaframe/out3Plot/outAIMEC.py on lines 1310..1310
avaframe/out3Plot/outAIMEC.py on lines 1311..1311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

    deltaS = avaProfileMass['s'][indEnd] - avaProfileMass['s'][indStart]
Severity: Major
Found in avaframe/ana1Tests/energyLineTest.py and 9 other locations - About 45 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 252..252
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 524..525
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 527..530
avaframe/out3Plot/outAIMEC.py on lines 1186..1186
avaframe/out3Plot/outAIMEC.py on lines 1187..1187
avaframe/out3Plot/outAIMEC.py on lines 1307..1307
avaframe/out3Plot/outAIMEC.py on lines 1308..1308
avaframe/out3Plot/outAIMEC.py on lines 1310..1310
avaframe/out3Plot/outAIMEC.py on lines 1311..1311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

    deltaz = rasterTransfo['z'][indVelStart] - rasterTransfo['z'][indVelZero]
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 9 other locations - About 45 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 251..251
avaframe/ana1Tests/energyLineTest.py on lines 252..252
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 524..525
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 527..530
avaframe/out3Plot/outAIMEC.py on lines 1187..1187
avaframe/out3Plot/outAIMEC.py on lines 1307..1307
avaframe/out3Plot/outAIMEC.py on lines 1308..1308
avaframe/out3Plot/outAIMEC.py on lines 1310..1310
avaframe/out3Plot/outAIMEC.py on lines 1311..1311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

            if cfgRangeTime['GENERAL'].getboolean('originStart'):
                rangeValue = rasterTransfo['s'][cLower]
            else:
                rangeValue = rasterTransfo['s'][cLower] - rasterTransfo['s'][indStartOfRunout]
Severity: Major
Found in avaframe/ana5Utils/distanceTimeAnalysis.py and 9 other locations - About 45 mins to fix
avaframe/ana1Tests/energyLineTest.py on lines 251..251
avaframe/ana1Tests/energyLineTest.py on lines 252..252
avaframe/ana5Utils/distanceTimeAnalysis.py on lines 524..525
avaframe/out3Plot/outAIMEC.py on lines 1186..1186
avaframe/out3Plot/outAIMEC.py on lines 1187..1187
avaframe/out3Plot/outAIMEC.py on lines 1307..1307
avaframe/out3Plot/outAIMEC.py on lines 1308..1308
avaframe/out3Plot/outAIMEC.py on lines 1310..1310
avaframe/out3Plot/outAIMEC.py on lines 1311..1311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language