Sign upLogin

Unidata/MetPy

View on GitHub
Star

Showing 106 of 141 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

@pytest.mark.parametrize('u,v', [(np.array([3]) * units('m/s'), np.array([3])),
                                 (np.array([3]), np.array([3]) * units('m/s'))])
Severity: Major
Found in tests/plots/test_station_plot.py and 1 other location - About 3 hrs to fix
tests/plots/test_skewt.py on lines 429..430

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 71.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function _interp_logp_height has a Cognitive Complexity of 36 (exceeds 15 allowed). Consider refactoring.
Open

def _interp_logp_height(sounding, missing=-9999):
    """Interpolate height linearly with respect to log p.

    This function mimics the functionality of the MR_INTZ
    subroutine in GEMPAK.
Severity: Minor
Found in src/metpy/io/gempak.py - About 3 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

@pytest.mark.parametrize('u,v', [(np.array([3]) * units('m/s'), np.array([3])),
                                 (np.array([3]), np.array([3]) * units('m/s'))])
Severity: Major
Found in tests/plots/test_skewt.py and 1 other location - About 3 hrs to fix
tests/plots/test_station_plot.py on lines 411..412

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 71.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function draw has a Cognitive Complexity of 34 (exceeds 15 allowed). Consider refactoring.
Open

        def draw(self, renderer):
            """Draw the :class:`TextCollection` object to the given *renderer*."""
            if renderer is not None:
                self._renderer = renderer
            if not self.get_visible():
Severity: Minor
Found in src/metpy/plots/_mpl.py - About 3 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function griddata has a Cognitive Complexity of 33 (exceeds 15 allowed). Consider refactoring.
Open

    def griddata(self):
        """Return the internal cached data."""
        if getattr(self, '_griddata', None) is None:

            # Select our particular field of interest
Severity: Minor
Found in src/metpy/plots/declarative.py - About 3 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    pos_srh, neg_srh, total_srh = storm_relative_helicity(heights, u, v,
                                                          bottom=50 * units.meters,
                                                          depth=300 * units.meters,
                                                          storm_u=5 * units('m/s'),
                                                          storm_v=10 * units('m/s'))
Severity: Major
Found in tests/calc/test_kinematics.py and 1 other location - About 3 hrs to fix
tests/calc/test_kinematics.py on lines 681..685

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    pos_srh, neg_srh, total_srh = storm_relative_helicity(heights, u, v,
                                                          bottom=50 * units.meters,
                                                          depth=300 * units.meters,
                                                          storm_u=5 * units('m/s'),
                                                          storm_v=10 * units('m/s'))
Severity: Major
Found in tests/calc/test_kinematics.py and 1 other location - About 3 hrs to fix
tests/calc/test_kinematics.py on lines 635..639

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

    pressure = np.array([1001, 1000, 997, 977.9, 977, 957, 937.8, 925, 906, 899.3, 887, 862.5,
                         854, 850, 800, 793.9, 785, 777, 771, 762, 731.8, 726, 703, 700, 655,
                         630, 621.2, 602, 570.7, 548, 546.8, 539, 513, 511, 485, 481, 468,
                         448, 439, 424, 420, 412]) * units.hPa
Severity: Major
Found in tests/calc/test_indices.py and 2 other locations - About 3 hrs to fix
tests/calc/test_indices.py on lines 68..71
tests/calc/test_thermo.py on lines 1580..1583

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

    pressure = np.array([1001, 1000, 997, 977.9, 977, 957, 937.8, 925, 906, 899.3, 887, 862.5,
                         854, 850, 800, 793.9, 785, 777, 771, 762, 731.8, 726, 703, 700, 655,
                         630, 621.2, 602, 570.7, 548, 546.8, 539, 513, 511, 485, 481, 468,
                         448, 439, 424, 420, 412]) * units.hPa
Severity: Major
Found in tests/calc/test_indices.py and 2 other locations - About 3 hrs to fix
tests/calc/test_indices.py on lines 52..55
tests/calc/test_thermo.py on lines 1580..1583

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

    pressure = np.array([1001, 1000, 997, 977.9, 977, 957, 937.8, 925, 906, 899.3, 887, 862.5,
                         854, 850, 800, 793.9, 785, 777, 771, 762, 731.8, 726, 703, 700, 655,
                         630, 621.2, 602, 570.7, 548, 546.8, 539, 513, 511, 485, 481, 468,
                         448, 439, 424, 420, 412]) * units.hPa
Severity: Major
Found in tests/calc/test_thermo.py and 2 other locations - About 3 hrs to fix
tests/calc/test_indices.py on lines 52..55
tests/calc/test_indices.py on lines 68..71

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function __init__ has a Cognitive Complexity of 31 (exceeds 15 allowed). Consider refactoring.
Open

    def __init__(self, filename):
        r"""Create instance of `Level3File`.

        Parameters
        ----------
Severity: Minor
Found in src/metpy/io/nexrad.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function _unpack_standard has a Cognitive Complexity of 29 (exceeds 15 allowed). Consider refactoring.
Open

    def _unpack_standard(self, sfcno):
        """Unpack a standard surface data file."""
        stations = []
        for irow, icol in sfcno:
            row_head = self.row_headers[irow]
Severity: Minor
Found in src/metpy/io/gempak.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function _unpack_ship has a Cognitive Complexity of 29 (exceeds 15 allowed). Consider refactoring.
Open

    def _unpack_ship(self, sfcno):
        """Unpack ship (moving observation) surface data file."""
        stations = []
        for irow, icol in sfcno:  # irow should always be zero
            col_head = self.column_headers[icol]
Severity: Minor
Found in src/metpy/io/gempak.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function _unpack_climate has a Cognitive Complexity of 29 (exceeds 15 allowed). Consider refactoring.
Open

    def _unpack_climate(self, sfcno):
        """Unpack a climate surface data file."""
        stations = []
        for irow, icol in sfcno:
            col_head = self.column_headers[icol]
Severity: Minor
Found in src/metpy/io/gempak.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function _unpack_unmerged has a Cognitive Complexity of 29 (exceeds 15 allowed). Consider refactoring.
Open

    def _unpack_unmerged(self, sndno):
        """Unpack unmerged sounding data."""
        soundings = []
        for irow, icol in sndno:
            row_head = self.row_headers[irow]
Severity: Minor
Found in src/metpy/io/gempak.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

IOBuffer has 23 functions (exceeds 20 allowed). Consider refactoring.
Open

class IOBuffer:
    """Holds bytes from a buffer to simplify parsing and random access."""

    def __init__(self, source):
        """Initialize the IOBuffer with the source data."""
Severity: Minor
Found in src/metpy/io/_tools.py - About 2 hrs to fix

    Identical blocks of code found in 3 locations. Consider refactoring.
    Open

        def _override_gc(self, renderer, gc, **kwargs):
        ret = renderer.new_gc()
        ret.copy_properties(gc)
        ret.set_joinstyle('miter')
        ret.set_capstyle('butt')
    Severity: Major
    Found in src/metpy/plots/patheffects.py and 2 other locations - About 2 hrs to fix
    src/metpy/plots/patheffects.py on lines 641..646
    src/metpy/plots/patheffects.py on lines 764..769

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 3 locations. Consider refactoring.
    Open

        def _override_gc(self, renderer, gc, **kwargs):
        ret = renderer.new_gc()
        ret.copy_properties(gc)
        ret.set_joinstyle('miter')
        ret.set_capstyle('butt')
    Severity: Major
    Found in src/metpy/plots/patheffects.py and 2 other locations - About 2 hrs to fix
    src/metpy/plots/patheffects.py on lines 100..105
    src/metpy/plots/patheffects.py on lines 641..646

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 3 locations. Consider refactoring.
    Open

        def _override_gc(self, renderer, gc, **kwargs):
        ret = renderer.new_gc()
        ret.copy_properties(gc)
        ret.set_joinstyle('miter')
        ret.set_capstyle('butt')
    Severity: Major
    Found in src/metpy/plots/patheffects.py and 2 other locations - About 2 hrs to fix
    src/metpy/plots/patheffects.py on lines 100..105
    src/metpy/plots/patheffects.py on lines 764..769

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function __init__ has a Cognitive Complexity of 27 (exceeds 15 allowed). Consider refactoring.
    Open

        def __init__(self, file):
        """Instantiate GempakFile object from file."""
        fobj = open_as_needed(file)

        with contextlib.closing(fobj):
    Severity: Minor
    Found in src/metpy/io/gempak.py - About 2 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Severity
    Category
    Status
    Source
    Language