owncloud/core

View on GitHub

Showing 1,654 of 13,915 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

OC.L10N.register(
    "lib",
    {
    "Cannot write into \"config\" directory!" : "\"config\" dizinine yazılamıyor!",
    "This can usually be fixed by giving the webserver write access to the config directory" : "Bu genellikle, web sunucusuna config dizinine yazma erişimi verilerek çözülebilir",
Severity: Major
Found in lib/l10n/tr.js and 1 other location - About 4 days to fix
lib/l10n/ast.js on lines 1..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 713.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

OC.L10N.register(
    "lib",
    {
    "Cannot write into \"config\" directory!" : "¡Nun pue escribise nel direutoriu \"config\"!",
    "This can usually be fixed by giving the webserver write access to the config directory" : "Davezu esto pue iguase dándo-y al sirvidor web accesu d'escritura al direutoriu de configuración",
Severity: Major
Found in lib/l10n/ast.js and 1 other location - About 4 days to fix
lib/l10n/tr.js on lines 1..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 713.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Compartir entre servidores no está habilitado en este servidor",
    "The mountpoint name contains invalid characters." : "El punto de montaje contiene caracteres inválidos.",
Severity: Major
Found in apps/files_sharing/l10n/es.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "此服务器未启用服务器到服务器分享功能",
    "The mountpoint name contains invalid characters." : "挂载点的名称包含无效字符。",
Severity: Major
Found in apps/files_sharing/l10n/zh_CN.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Das Server-zu-Server-Teilen ist auf diesem Server nicht aktiviert",
    "The mountpoint name contains invalid characters." : "Der Name des Einhängepunktes enthält ungültige Zeichen.",
Severity: Major
Found in apps/files_sharing/l10n/de.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Compartilhamento de servidor para servidor não está habilitado no servidor",
    "The mountpoint name contains invalid characters." : "O nome do ponto de montagem contém caracteres inválidos.",
Severity: Major
Found in apps/files_sharing/l10n/pt_BR.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Server to server sharing is not enabled on this server",
    "The mountpoint name contains invalid characters." : "The mountpoint name contains invalid characters.",
Severity: Major
Found in apps/files_sharing/l10n/en_GB.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Neste servidor non está activada a compartición de servidor a servidor",
    "The mountpoint name contains invalid characters." : "O nome do punto de montaxe contén caracteres incorrectos",
Severity: Major
Found in apps/files_sharing/l10n/gl.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Не е овозможено споделувањето од сервер на сервер на вашиот сервер",
    "The mountpoint name contains invalid characters." : "Името на монтираната точка содржи невалидни знаци.",
Severity: Major
Found in apps/files_sharing/l10n/mk.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Ndarja mes shërbyesish s’është e aktivizuar në këtë shërbyes",
    "The mountpoint name contains invalid characters." : "Emri i pikës së montimit përmban shenja të pavlefshme.",
Severity: Major
Found in apps/files_sharing/l10n/sq.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "На данном сервере выключено межсерверное предоставление общего доступа",
    "The mountpoint name contains invalid characters." : "Имя точки монтирования содержит недопустимые символы.",
Severity: Major
Found in apps/files_sharing/l10n/ru.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/th_TH.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "เซิร์ฟเวอร์ไปยังแชร์เซิร์ฟเวอร์ไม่ได้เปิดใช้งานบนเซิร์ฟเวอร์นี้",
    "The mountpoint name contains invalid characters." : "ชื่อจุดเชื่อมต่อมีตัวอักษรที่ไม่ถูกต้อง",
Severity: Major
Found in apps/files_sharing/l10n/th_TH.js and 9 other locations - About 4 days to fix
apps/files_sharing/l10n/de.js on lines 1..137
apps/files_sharing/l10n/en_GB.js on lines 1..137
apps/files_sharing/l10n/es.js on lines 1..137
apps/files_sharing/l10n/gl.js on lines 1..137
apps/files_sharing/l10n/mk.js on lines 1..137
apps/files_sharing/l10n/pt_BR.js on lines 1..137
apps/files_sharing/l10n/ru.js on lines 1..137
apps/files_sharing/l10n/sq.js on lines 1..137
apps/files_sharing/l10n/zh_CN.js on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 678.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Server til server-deling er ikke aktivert på denne serveren",
    "The mountpoint name contains invalid characters." : "Navnet på oppkoblingspunktet inneholder ugyldige tegn.",
Severity: Major
Found in apps/files_sharing/l10n/nb_NO.js and 2 other locations - About 3 days to fix
apps/files_sharing/l10n/de_DE.js on lines 1..136
core/l10n/ar.js on lines 1..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 673.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

OC.L10N.register(
    "core",
    {
    "Please select a file." : "فضلاً إختر ملفاً.",
    "File is too big" : "الملف كبير جداً",
Severity: Major
Found in core/l10n/ar.js and 2 other locations - About 3 days to fix
apps/files_sharing/l10n/de_DE.js on lines 1..136
apps/files_sharing/l10n/nb_NO.js on lines 1..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 673.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

OC.L10N.register(
    "files_sharing",
    {
    "Server to server sharing is not enabled on this server" : "Das Server-zu-Server-Teilen ist auf diesem Server nicht aktiviert",
    "The mountpoint name contains invalid characters." : "Der Name des Einhängepunktes enthält ungültige Zeichen.",
Severity: Major
Found in apps/files_sharing/l10n/de_DE.js and 2 other locations - About 3 days to fix
apps/files_sharing/l10n/nb_NO.js on lines 1..136
core/l10n/ar.js on lines 1..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 673.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

OC.L10N.register(
    "files",
    {
    "Storage is temporarily not available" : "El almacenamiento no se encuentra disponible temporalmente",
    "Storage invalid" : "Almacenamiento inválido",
Severity: Major
Found in apps/files/l10n/es.js and 5 other locations - About 3 days to fix
apps/files/l10n/gl.js on lines 1..129
apps/files/l10n/is.js on lines 1..129
apps/files/l10n/mk.js on lines 1..129
apps/files/l10n/pt_BR.js on lines 1..129
apps/files/l10n/sq.js on lines 1..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 656.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

OC.L10N.register(
    "files",
    {
    "Storage is temporarily not available" : "Gagnageymsla ekki tiltæk í augnablikinu",
    "Storage invalid" : "Ógild gagnageymsla",
Severity: Major
Found in apps/files/l10n/is.js and 5 other locations - About 3 days to fix
apps/files/l10n/es.js on lines 1..129
apps/files/l10n/gl.js on lines 1..129
apps/files/l10n/mk.js on lines 1..129
apps/files/l10n/pt_BR.js on lines 1..129
apps/files/l10n/sq.js on lines 1..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 656.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

OC.L10N.register(
    "files",
    {
    "Storage is temporarily not available" : "O almacenamento non está dispoñíbel temporalmente",
    "Storage invalid" : "Almacenamento incorrecto",
Severity: Major
Found in apps/files/l10n/gl.js and 5 other locations - About 3 days to fix
apps/files/l10n/es.js on lines 1..129
apps/files/l10n/is.js on lines 1..129
apps/files/l10n/mk.js on lines 1..129
apps/files/l10n/pt_BR.js on lines 1..129
apps/files/l10n/sq.js on lines 1..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 656.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

OC.L10N.register(
    "files",
    {
    "Storage is temporarily not available" : "Depozita është përkohësisht jashtë pune",
    "Storage invalid" : "Depozitë e pavlefshme",
Severity: Major
Found in apps/files/l10n/sq.js and 5 other locations - About 3 days to fix
apps/files/l10n/es.js on lines 1..129
apps/files/l10n/gl.js on lines 1..129
apps/files/l10n/is.js on lines 1..129
apps/files/l10n/mk.js on lines 1..129
apps/files/l10n/pt_BR.js on lines 1..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 656.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

OC.L10N.register(
    "files",
    {
    "Storage is temporarily not available" : "Складот е привремено недостапен",
    "Storage invalid" : "Складиштето не е валидно",
Severity: Major
Found in apps/files/l10n/mk.js and 5 other locations - About 3 days to fix
apps/files/l10n/es.js on lines 1..129
apps/files/l10n/gl.js on lines 1..129
apps/files/l10n/is.js on lines 1..129
apps/files/l10n/pt_BR.js on lines 1..129
apps/files/l10n/sq.js on lines 1..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 656.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language